Reset tire pressure warning light Toyota Solara 2 generation. From year: 2004, 2005, 2006, 2007, 2008.
How to reset tire pressure warning light Toyota Solara second generation.
This light warns that the tire pressure of one or more of your tires (including ground spare tire) is low. The light comes on when the ignition key is turned to the “ON” position. It goes off after a few seconds. This indicates that the tire pressure warning system is functioning properly. If the warning light comes on, stop your vehicle in a safe place as soon as possible and check that the inflation pressure of all tires (including ground spare tire) is as specified on the tire and loading information label.
The light should go off a few minutes after the tire pressure is adjusted.
If the warning light comes on after blinking for 1 minute, the tire pressure warning system may be malfunctioning. Contact your Toyota dealer.
TIRE PRESSURE WARNING RESET SWITCH.
When initializing the system, the present tire inflation pressure is stored as standard. The tire pressure warning system determines decreased air pressure by comparing the present and the standard tire inflation pressures. When you change the set tire inflation pressure, it is necessary to initialize the tire pressure warning system.
- When changing the tire size.
- When rotating the tire on vehicles differing with front and rear tire inflation pressure.
To initialize the system, perform the following:
- Park the vehicle in a safe place and turn the ignition key to “OFF” position.
- Adjust the pressure of all the installed tires to the specified cold tire inflation pressure level.
- Turn the ignition key to the “ON” position.
- Push and hold the tire pressure warning reset switch until the tire pressure warning light blinks slowly three times.
- Leave for a few minutes with the ignition key in “ON” position, and then turn the ignition key to “OFF” position.
If you push the tire pressure reset switch while vehicle is moving, initialization is not performed. If you push the tire pressure reset switch accidentally and initialization is performed, adjust the tire inflation pressure to the specified level and initialize the system again.
If the tire pressure warning light does not blink slowly three times when you push and hold the reset switch, initialization has failed and the tire pressure warning system may not work properly. In this case, initialize the system again. If initialization cannot be performed, have the system checked at your Toyota dealer.
Do not push the reset switch without first adjusting the tire inflation pressure to the specified level. Otherwise, the tire pressure warning light may not come on even if the tire inflation pressure is low, or it may come on when the tire inflation pressure is actually normal.
That it is the full procedure how to reset tire pressure warning light Toyota Solara second generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.