Tag Archives: warning light

Fiat Ducato 3 reset seat belt reminder light

Leave a reply

How to reset S.B.R. (seat belt reminder) light Fiat Ducato III.

Reset seat belt reminder light Fiat Ducato 3. From year: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

The vehicle is fitted with the S.B.R. system (Seat Belt Reminder), consisting of a buzzer which, together with the turning on flashing of warning light < on the instrument panel, warns the driver to fasten the seat belt.

The buzzer can be deactivated (until the next engine stop) as follows:

  • fasten the driver’s seat belt;
  • turn the ignition key to MAR;
  • wait for over 20 seconds and then release one of the seat belts.

For permanent deactivation, contact Fiat Dealership.

With digital display, the S.B.R. system can only be reset at Fiat Dealership.

With multifunction display, the S.B.R. system can also be reset through the set-up menu.

That it is the full procedure how to reset seat belt reminder light Fiat Ducato 3. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

Land Cruiser reset automatic transmission fluid temperature light

Leave a reply

How to reset automatic transmission fluid temperature indicator light Toyota Land Cruiser.

Reset automatic transmission fluid temperature warning light Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

This light warns that the automatic transmission fluid temperature is too high. If this light comes on while you are driving, slow down and pull off the road. Stop the vehicle at a safe place and put the selector lever in “P” and leave the engine idling until the light goes off. If the light goes off, you can start the vehicle again. If the light does not go off, call a Toyota dealer or qualified repair shop for assistance.

Continued driving with the warning light on may damage the automatic transmission.

Toyota Land Cruiser 100 series Reset unengaged park warning light

Leave a reply

How to reset unengaged park warning light Toyota Land Cruiser 100 series.

Reset unengaged park warning light Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

This light warns that the transmission “Park” mechanism is not engaged. If the four−wheel drive control is in the “N” position while the selector lever is in the “P” position, the transmission will disengage and the wheels will not lock.

To restore the park function, shift the four−wheel drive control out of “N”, or the vehicle can move.

All information how to restore the unengaged park warning light is taken from Toyota Land Cruiser 100 series owners manual.

Reset open door warning light Toyota Land Cruiser 100 series

Leave a reply

How to reset open door warning light Toyota Land Cruiser 100 series.

Reset open door warning light Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

This light remains on until all the side doors and back door are completely closed.

Below is a picture of how it looks the Toyota Land Cruiser 100 series open door warning light.

Reset-open-door-warning-light-Toyota-Land-Cruiser-100-series

All this information they are taken from Toyota Land Cruiser 100 series owners manual. If the above procedure is not working means that you have damage a sensor. Before you panic check if you have not got the seatbelt in the door.

Reset tire pressure warning light Toyota Land Cruiser 100 series

Leave a reply

How to reset tire pressure warning light Toyota Land Cruiser 100 series.

Reset tire pressure warning light Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

This light comes on when the ignition key is turned to the “ON” position. If the tire pressure warning system works properly and tire inflation pressure is appropriate, the light goes off after a few seconds. This light comes on or flashes in the folowing cases when the ignition key is turned to the “ON” position.

When the low tire inflation pressure is detected while driving.

If any tire has low inflation pressure, the light comes on.

The light goes off after the tire inflation pressure is adjusted to a specified level.

When initializing the system.

If initialization is completed, the light blinks three times.

When the system malfunctions.

If the system malfunctions, the light blinks. Although it is no problem to continue driving, have your vehicle checked by your Toyota dealer as soon as possible.

All information how to reset tire pressure warning light is taken from Toyota Land Cruiser 100 series owners manual.