How to reset VSC trac warning light Toyota FJ Cruiser.

Reset VSC trac warning light Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

The light warns that there is a problem somewhere in the following.

Vehicle stability control system.
Traction control system.
Active traction control system four−wheel drive models with rear differential lock.
AUTO LSD system two−wheel drive models.
Four-wheel drive models, and vehicles with rear differential lock-the “VSC OFF” indicator light will come on with the “VSC TRAC” warning light if there is a problem somewhere in the vehicle stability control system.

The light will come on when the ignition key turned to “ON”, and will go off after a few seconds.

The slip indicator light will come on with the “VSC TRAC” warning light if there is a problem somewhere in the following.

Traction control system.
Active traction control system four−wheel drive models with rear differential lock.
AUTO LSD system two−wheel drive models.
It is not a malfunction that the warning light may stay on for 60 seconds after the ignition key is turned to the “ON” position. Depressing the brake pedal repeatedly may turn on the lights. It is normal if they go out after a few seconds.

If the light comes on while driving, the above mentioned systems do not work. However, as conventional braking operates when applied, there is no problem to continue your driving.

In the following cases, contact your Toyota dealer:

The warning light does not come on after the ignition key is turned to “ON”.
The warning light remains on after the ignition key is turned to “ON”.
The warning light comes on while driving.
When the brake fluid level is too low, the above mentioned systems will not operate and the warning light comes on.

All information how can you reset VSC trac warning light is taken from Toyota FJ Cruiser owners manual.