Tag Archives: trip odometer

How reset oil light GMC Acadia

Leave a reply

How do you reset maintenance light, reset service light indicator GMC Acadia. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life GMC Acadia, oil reset instructions:

year 2007


With Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine).
2. Press the MODE button until the DIC reads OIL LIFE LEFT/HOLD SET TO RESET.
3. Press and hold the SET button until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Without Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

year 2008-2013

With Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine).
2. Press the vehicle information button (i) until OIL LIFE REMAINING displays.
3. Press and hold the SET/RESET (check mark) button until 100% is displayed. You will hear 3 chimes and CHANGE ENGINE OIL SOON message will go off.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Without Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine). The vehicle must be in PARK (P) to access this display. Press the trip odometer reset stem until OIL LIFE REMAINING displays.
2. Press and hold the trip odometer reset stem until OIL LIFE REMAINING shows 100%. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil Service Reset BMW Z8

Leave a reply

Reset service light indicator, engine oil life BMW Z8 year 2000-2003 reset instructions:

BMW recommends the use of a reset tool.

Manual Reset

1. Turn off the ignition.
2. Press and hold the TRIP ODOMETER button in the instrument cluster and turn the ignition to Accessory.
3. Keep the button pressed for 5 seconds until OIL SERVICE RESET (RE) or INSPECTION RESET (RE) appears in the display. Then release the button.
4. Press and hold the button again for 5 seconds until RE or RESET flashes in the display. Then release the button.
5. With the display flashing
6. Turn the ignition off and start the engine to verify the indicator has been reset.

Oil service light reset indicator 2006 Volvo XC90, 2006

Leave a reply

Reset service interval display, insp and oil service for Volvo XC90, 2006, that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life Volvo XC90, oil reset instructions:

“Resetting the service reminder indicator (SRI), model years 2002-
The service reminder indicator (SRI) informs the driver that it is time for the car to be serviced. The text message is displayed for 120s each time the ignition is switched on.
Proceed as follows to reset the service reminder indicator (SRI):

1.Ignition position I
2. Press and hold in the reset button for the trip odometer
3. Ignition position II. Note! Turn the key to position II within 2 seconds
4. Hold the reset button for the trip meter pressed in until the original value has been reset. Note! For all vehicles from the 2003 model year a general yellow lamp will light when the reset button must be released
5. Release the reset button for the trip odometer within 4 seconds. The instrument gives an audible signal when resetting has succeeded
6. If the trip meter is already reset the reset button should be held in for a minimum of 10 seconds and a maximum of 14 seconds.

Note! If the reset button for the trip odometer is not released within 4 seconds, the service reminder indicator (SRI) is not reset.”

Oil service reset Volkswagen Tiguan

Leave a reply

Reset service light indicator, engine oil life Volkswagen Tiguan, year 2009-2010 reset instructions:

Manual Reset:
Turn the ignition to run (one position before starting engine).
Press and HOLD the trip-odometer button “0.0”.
Turn your key to run (one position before starting engine).
Release the trip-odometer button.
Push and release the Clock Minute Set Button “min”.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Saturn Outlook

Leave a reply

2007-2009

If your vehicle does not have Driver Information Center (DIC) buttons:
Turn the ignition to run (one position before starting engine).
Press the trip odometer reset stem until OIL LIFE REMAINING displays.
Press and hold the trip odometer reset stem until OIL LIFE REMAINING shows 100%. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
Turn the ignition off and then start the engine to verify the indicator has been reset.

If your vehicle has Driver Information Center (DIC) buttons:
Turn the ignition to run (one position before starting engine).
Press the vehicle information button (square) until OIL LIFE REMAINING displays.
Press and hold the set/reset button (arrow) until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
Turn the ignition off and then start the engine to verify the indicator has been reset.