Tag Archives: trip odometer button

Oil reset service light indicator Opel Corsa C

Leave a reply

Instructions how reset service light indicator Opel Corsa C. From years: 2000, 2001, 2002, 2003, 2004, 2005, 2006.

There are two ways to reset service light Opel Corsa C.

1. How to reset service light indicator Opel Corsa C.

  1. Ignition OFF.
  2. Press and hold reset trip odometer button.
  3. Turn the ignition on, one position before starting engine.
  4. The letters INSP will appear in the display and they will flash for couple seconds.
  5. Kepp the trip odometer button pressed until the text “- – – “ appears in the display.
  6. Release trip odometer button and switch ignition off.
  7. I think this procedure is valid for models until year 2003.

2. How do you reset service light indicator Opel Corsa C.

  1. Get into the car and shut the door.
  2. Press and hold trip reset button.
  3. After a couple seconds you will see leters “InSp 0″ on display.
  4. Keep holding trip reset button and press and hold the trip reset button.
  5. Switch ignition on, one position before starting engine.
  6. On the display will appear this message “InSP” and under InSP this “- – – -”.
  7. Continue to hold the trip button and brake pedal for about 15 seconds.
  8. At this point it should flash up “InSP —” and then the reset mileage 19000 (in some cases instead of 19000 will appear other number, for example 15000 or 30000).
  9. You can release the trip button and brake pedal and the indicator is reset.

I think this procedure is valid for models after year 2003.

Oil reset service light indicator Opel Corsa D

Leave a reply

Instructions how reset service light indicator Opel Corsa D. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.

There are two ways to reset service light Opel Corsa d.

1. How to reset service light indicator Opel Corsa D.

  1. Get into the car and shut all doors.
  2. Wait for the milage (km) and displays to go off .
  3. Press and hold the brake pedal.
  4. Press and hold the trip reset button at the same time with the brake.
  5. Turn on the ignition to the point where all the lights come on, do not start the engine.
  6. The mileage (km) will come up on the dash and then InSP with four dashes “—-” will appear, do not release the trip button and brake pedal.
  7. Continue to hold the trip button and brake pedal for about 15 seconds.
  8. At this point it should flash up insp and then the reset mileage 15,000-30,000.
  9. Now you can release the trip button and brake pedal, the indicator is reset.

2. How do you reset service light indicator Opel Corsa D.

  1. Ignition OFF.
  2. Press and hold reset trip odometer button.
  3. Turn the ignition on, one position before starting engine.
  4. The letters InSP and symbol “- – – – ” will appear in the display.
  5. Kepp the trip odometer button for about 15 seconds.
  6. At this point it should flash up insp and then the reset mileage 15,000-30,000.
  7. Release trip odometer button and switch ignition off.

Inspection system Opel Corsa D. In order to guarantee economical and safe vehicle operation and to maintain the value of your vehicle, it is of vital importance that all maintenance work is carried out at the proper intervals.
If the service interval remaining distance is less than 1500 km, InSP is displayed with a remaining distance of 1000 km when the ignition is switched on and off. If less than 1000 km remains, InSP is displayed for several seconds. Have the next service performed by a workshop within one week or 500 km (whichever occurs first).

Oil reset service light indicator Opel Agila

Leave a reply

How to reset service light indicator Opel Agila A. From years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007.

Reset service light indicator Opel Agila. From years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

  1. Ignition OFF, the display in the instrument cluster must show the trip odometer.
  2. Press and hold trip odometer button.
  3. Turn on the ignition.
  4. Keep trip odometer button button pressed for at least 15 seconds longer until the service interval indicator changes.
  5. After approximately 15 seconds the display on the instrument cluster displays the symbol with the maximum mileage (km) and InSP for 2 seconds.
  6. After a successful reset, the message “- – – -” appears in the display until the actuating knob is released.
  7. Then the distance travelled or the time display appears again.

How do you reset service light indicator Opel Agila B. From years: 2008, 2009, 2010, 2011, 2012.

  1. Start with key in, ignition OFF.
  2. Press and hold both buttons (clock button and trip reset button) on the instrument cluster button.
  3. Turn ignition ON, do not start the car.
  4. Keep holding clock button and trip reset button until on the display will appear InSP message, the indicator will flash three times and change to three dashes “- – – “.
  5. Release the buttons.
  6. Turn ignition OFF.
  7. Turn ignition back ON to confirm that the service light indicator was reset.

In the case of vehicles with fixed engine oil change and service intervals, InSP appears in the odometer display if the ignition is switched on when servicing is overdue: have the next service carried out within one week or 300 miles (500 km). Seek the assistance of a workshop. After the service is complete, have the display reset.

Indicates when the engine oil and oil filter require changing. Based on driving conditions, the interval at which an oil change will be indicated can vary considerably. When the system has calculated that oil life has been diminished, control indicator I flashes in the instrument cluster when the engine is running. Engine oil and oil filter need changing immediately. Engine power may be decreased. For the system to work properly, it must be reset every time the engine oil and oil filter are changed: seek the assistance of a workshop.

Oil reset service light indicator Opel Astra

Leave a reply

How to reset service light indicator Opel Astra G (Opel Astra Classic II). From years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006.

Reset service light indicator Opel Astra. From years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

  1. Ignition OFF.
  2. Press and hold reset trip odometer button.
  3. Turn the ignition on, one position before starting engine.
  4. The letters INSP will appear in the display for about 2 seconds.
  5. Kepp the trip odometer button pressed until the text “- – – “ appears in the display.

If the above procedure how do you reset service light indicator Opel Astra G does not work try this.

  1. Get into the car and shut the door.
  2. Press and hold the brake pedal.
  3. Press and hold the trip reset button, with the brake still pressed down.
  4. Switch ignition on, one position before starting engine.
  5. On the display will appear this message “InSP” and under InSP this “- – – -”.
  6. Continue to hold the trip button and brake pedal for about 15 seconds.
  7. At this point it should flash up InSP and then the reset mileage 19000 (in some cases instead of 19000 will appear other number, for example 15000 or 30000).
  8. You can release the trip button and brake pedal and the indicator is reset.

How do you reset service light indicator Opel Astra H (Opel Astra Classic III). From years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

  1. Get into the car and shut the door.
  2. Press and hold the brake pedal.
  3. Press and hold the trip reset button, with the brake still pressed down.
  4. Switch ignition on, one position before starting engine.
  5. On the display will appear this message “InSP” and under InSP this “- – – -”.
  6. Continue to hold the trip button and brake pedal for about 15 seconds.
  7. At this point it should flash up InSP and then the reset mileage 19000 (in some cases instead of 19000 will appear other number, for example 15000 or 30000).
  8. You can release the trip button and brake pedal and the indicator is reset.

If the above procedure how do you reset service light indicator Opel Astra H does not work try this.

  1. Ignition OFF.
  2. Press and hold reset trip odometer button.
  3. Turn the ignition on, one position before starting engine.
  4. The letters INSP will appear in the display for about 2 seconds. Picture below.
  5. Kepp the trip odometer button pressed until the text “- – – “ appears in the display.
  6. You can release the trip button, now the indicator is reset.

How can you reset service light indicator Opel Astra J. From years: 2009, 2010, 2011, 2012.

  1. Turn the ignition on, one position before starting engine.
  2. Press MENU button until on the display will appear vehicle information menu.
  3. Rotate the button which has on it two arrows one up one down, is located next to the MENU button, until message Remaining oil life is displayed.
  4. Pres and hold button SET/CLR, press brake pedal.
  5. Release SET/CLR button and brake pedal, switch ignition off.

Oil reset service light indicator Opel Corsa

Leave a reply

How to reset service light indicator Opel Corsa C. From years: 2000, 2001, 2002, 2003, 2004, 2005, 2006.

Reset service light indicator Opel Corsa. From years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

There are two ways to reset service light Opel Corsa C.

  1. Ignition OFF.
  2. Press and hold reset trip odometer button.
  3. Turn the ignition on, one position before starting engine.
  4. The letters INSP will appear in the display and they will flash for couple seconds.
  5. Kepp the trip odometer button pressed until the text “- – – “ appears in the display.
  6. Release trip odometer button and switch ignition off.

I think this procedure is valid for models until year 2003.

The second procedure how to reset service light indicator Opel Corsa C. From years: 2000, 2001, 2002, 2003, 2004, 2005, 2006.

  1. Get into the car and shut the door.
  2. Press and hold trip reset button.
  3. After a couple seconds you will see leters “InSp 0″ on display.
  4. Keep holding trip reset button and press and hold the trip reset button.
  5. Switch ignition on, one position before starting engine.
  6. On the display will appear this message “InSP” and under InSP this “- – – -”.
  7. Continue to hold the trip button and brake pedal for about 15 seconds.
  8. At this point it should flash up “InSP —” and then the reset mileage 19000 (in some cases instead of 19000 will appear other number, for example 15000 or 30000).
  9. You can release the trip button and brake pedal and the indicator is reset.

I think this procedure is valid for models after year 2003.