Tag Archives: trip meter

Reset service light oil life indicator dashboard Scion tC

Leave a reply

How do you reset maintenance light, reset service light indicator Scion tC, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Scion tC, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Select trip metre A reading by using the trip metre button and then turn the ignition off.
  3. While pressing the trip meter reset button, turn the ignition switch to run (one position before starting engine).
  4. Continue to press and hold the button until the trip meter displays “000000”.
  5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Toyota RAV4

Leave a reply

How do you reset maintenance light, reset service light indicator Toyota RAV4, year 2013, 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Toyota RAV4, year 2013, 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Ensure Trip Metre A reading is shown. Turn the ignition off.
  3. While pressing the DISP button turn the igniton on (do not start the engine).
  4. Continue to press and hold the button until the trip meter displays “000000”.
  5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Toyota Prius

Leave a reply

How do you reset maintenance light, reset service light indicator Toyota Prius, year 2013, 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Toyota Prius, year 2013, 2014, 2015 oil reset instructions:

  1. Press the “ENGINE START STOP” switch once (do not start engine) or turn ignition key to run (one position before starting engine).
  2. Ensure Trip Metre A reading is shown. Turn the ignition off.
  3. While holding the MPH or KM/H button turn the ignition on (do not start engine).
  4. Continue to press and hold the button until the trip meter displays “000000” and the display indicates the reset is complete.
  5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Lexus RX

Leave a reply

How do you reset maintenance light, reset service light indicator Lexus RX, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Lexus RX, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (push START/STOP button once). Use the trip meter switch to bring up the trip meter A reading. Turn the ignition off.
  2. While pressing the “ODO/TRIP” button, set the engine switch to run (push START/STOP button once).
  3. Continue holding the “ODO/TRIP button for about 5 seconds. The resetting procedure is complete when “000000” in the trip metre flashes once and the message in the multi information display disappears.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Scion xB

Leave a reply

How do you reset maintenance light, reset service light indicator Scion xB, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life maintenance data reset Scion xB, year 2014, 2015 oil reset instructions:

  1. Start the engine.
    *one position before starting engine
  2. Select trip metre A reading by using the trip metre button and then turn the ignition off.
  3. While pressing the trip meter reset button, turn the engine switch to the ON position (do not start the engine or the reset process will be cancelled). Continue to press and hold the button until the trip metre displays “000000”.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.