Tag Archives: toggle

Oil reset service light indicator Range Rover Sport

How do you reset service light indicator Range Rover Sport. From year: 2007.

Reset service light indicator Range Rover Sport. How to reset maintenance light, reset oil service light. Can be made manually by use button on car dash board.

Instructions:

  1. Turn off the cars ignition.
  2. Hold down the reset button on the dash board to zero the mileage. keep it held in.
  3. Turn the cars ignition on, but do not start. Keep the button in for 5 seconds.
  4. A menu will come up, like date/mileage.
  5. Let go and then press the button again.
  6. It will toggle through some options, then get to rst.
  7. Press the button again, and your done.

Reset service light indicator Seat Inca

Reset service light indicator Seat Inca. From year: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003.

How to reset service light indicator Seat Inca.

1. Turn on the ignition, do not start the engine.
2. Push and holf the left hand button on the clocks.
3. With the button still pressed turn the ignition to off.
5. Release the button and you should be able to toggle between the oil, insp1 and insp2 warning light.
6. Choose the warning light that you want to reset.
7. On the right hand side of the clocks there are 2 buttons.
8. Push the bottom button with a biro and hold it until the warning light is reset.

Oil service reset NISSAN GT-R

2009-2011

1. Push the ignition switch to the ON position (do not start the engine). Use the ENTER button (?) and toggle the vehicle information display to show the SETTING screen. Use the NEXT button (?) to select.
2. Use the NEXT button (?) to select MAINTENANCE
i) SETTING > MAINTENANCE > OIL > ENGINE OIL to set or reset the mileage for the engine oil change.
ii) SETTING > MAINTENANCE > FILTER > to set or reset the mileage for the engine oil filter.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

RESET SERVICE INDICATOR SEAT INCA

Hot to reset service light on a Seat Inca

Try this.

Switch on the ignition.

Press the left hand button on the clocks and hold it in while switching off the ignition.

Release the button and you should be able to toggle between the oil, insp1 and insp2 indicators.

Choose the one you want to reset.

On the right hand side of the clocks there is two buttons.

Press and hold the bottom button with a biro and hold it until the display is reset.

Reset the service indicator light 2007 Renault Clio

How do you reset maintenance light, reset service light indicator Renault Clio 2007. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Renault Clio, oil reset instructions:

Turn on the ignition, but don’t start the car. On the right stalk there is a toggle switch that hinges up and down, and is used for going through the different features of the display. When the display shows ‘Service Due’ press and hold the top part of this switch for 10 seconds until the dispaly resets and it shows 30,000km or whatever until next service.
Turn on the ignition, but don’t start the car. On the right stalk there is a toggle switch that hinges up and down, and is used for going through the different features of the display. When the display shows ‘Service Due’ press and hold the top part of this switch for 10 seconds until the dispaly resets and it shows 30,000km or whatever until next service.

all of the above is correct apart from pressing the toggle button. if you instead press the bottom toggle button for 10 seconds the display will start to flash. Keep button depressed and 5 seconds later the service counter will reset.