Tag Archives: steering column

Service oil reset Hummer H2

Leave a reply

How do you reset maintenance light, reset service light indicator Hummer H2, year 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010. For reset maintenance light and that can be made manually by use button on car dash board.

Instructions to reset service indicator 2003-2010

2003

Turn the ignition to run (one position before starting engine).
Press the fuel information button (located on instrument panel cluster above steering column) until ENGINE OIL LIFE appears in the display.
Press and hold the select button (arrow button) for 5 seconds while ENGINE OIL LIFE is displayed. OIL LIFE RESET will appear on the display for 10 seconds to let you know the system is reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2004-2007

Turn the ignition to run (one position before starting engine).
Immediately after step 1 press and release the accelerator pedal 3 times within 5 seconds. If the OIL LIFE RESET message flashes for 10 seconds, the system is resetting.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2008-2010

Turn the ignition to run (one position before starting engine).
Display the OIL LIFE REMAINING on the DIC by pressing the (i) button.
Press and hold the SET/RESET button (check mark button) on the DIC for more than 5 seconds. The oil life will change to 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Acura Integra

Leave a reply

Reset service light indicator, engine oil life, dashboard oil life indicator Acura Integra, year: 1986-1990, instructions for manually resetting the trip computer:

Reset the indicator by inserting the key in the slot below the indicator.
or
Turn ignition to position 2 (do not start the engine).
Press and hold the RESET button on the bottom of the dash for more than 3 seconds until the reminder light turns off.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1991-1993

Reset the coloured indicator by inserting the key in the slot below the indicator.

1994-1995

Turn ignition to position 2 (do not start the engine).
Press and hold the RESET button located at the bottom of the dash for more than 3 seconds until the reminder light turns off.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1996-2001

Turn ignition to position 2 (do not start the engine).
Press the RESET button located below and to the right of the steering column (feel for a soft spot) until light goes out.
Turn the ignition off and then start the engine to verify the indicator has been reset.