Tag Archives: steering column

Reset engine oil life indicator Hummer H2

Leave a reply

How do you reset maintenance light indicator, reset service light indicator Hummer H2, year 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012. For reset maintenance light and that can be made manually by use button on car dash board.
Reset engine oil life indicator Hummer H2

  1. Turn the ignition to run (one position before starting engine).
  2. Press the fuel information button (located on instrument panel cluster above steering column) until ENGINE OIL LIFE appears in the display.
  3. Press and hold the select button (arrow button) for 5 seconds while ENGINE OIL LIFE is displayed. OIL LIFE RESET will appear on the display for 10 seconds to let you know the system is reset.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light indicator BMW 6 Series

Leave a reply

Reset oil service light BMW 6 Series. For models: BMW E24, BMW E63, BMW E64, BMW F12, BMW F13.

Reset oil service light BMW 6 Series model E63. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010.

How do you reset oil service light BMW 6 Series model E63.

  1. Insert key.
  2. Press START/STOP button without pressing clutch/brake, wait for the service reminder to disappear.
  3. Immediately, after service reminder goes out, press and hold the odometer reset. After 3 seconds a warning triangle will appear.
  4. .
  5. Keep the odometer reset button pressed. After another 2-3 seconds the oil-can symbol will appear. If you hold the button too long, about 10 seconds, the system will go into an internal coding mode. In this case, shut everything down and start over.
  6. After properly performing step-3, the system will be in the service menu mode. Use the push button (BC button) on the end of the left steering column switch (wipers, high/low beams) to scroll through the various service items.
  7. When the oil service light is displayed, press the BC button on the end of wiper switch. “Reset” should now appear in the display. Press and hold the BC button for 2-3 seconds. A small clock display will show as the reset is being performed.
  8. Reset oil service light BMW 6 Series E63, picture below.
  9. .
  10. You can now select another item to reset (as in step-4) or press the START/STOP button to end.

 

Reset oil service light BMW 6 Series E64. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010.

How do you reset oil service light BMW 6 Series model E64.

  1. Insert key.
  2. Press START/STOP button without pressing clutch/brake, wait for the service reminder to disappear.
  3. Immediately, after service reminder goes out, press and hold the odometer reset. After 3 seconds a warning triangle will appear.
  4. .
  5. Keep the odometer reset button pressed. After another 2-3 seconds the oil-can symbol will appear. If you hold the button too long, about 10 seconds, the system will go into an internal coding mode. In this case, shut everything down and start over.
  6. After properly performing step-3, the system will be in the service menu mode. Use the push button (BC button) on the end of the left steering column switch (wipers, high/low beams) to scroll through the various service items.
  7. When the oil service light is displayed, press the BC button on the end of wiper switch. “Reset” should now appear in the display. Press and hold the BC button for 2-3 seconds. A small clock display will show as the reset is being performed.
  8. Reset oil service light BMW 6 Series E64, picture below.
  9. .
  10. You can now select another item to reset (as in step-4) or press the START/STOP button to end.

 

That it is the full procedure how to reset oil service light BMW 6 Series. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for BMW cars. Or any error which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

Reset oil service light BMW 6 Series

Leave a reply

Reset oil service light BMW 6 Series. For models: BMW E24, BMW E63, BMW E64, BMW F12, BMW F13.

Reset oil service light BMW 6 Series model E63. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010.

How do you reset oil service light BMW 6 Series model E63.

  1. Insert key.
  2. Press START/STOP button without pressing clutch/brake, wait for the service reminder to disappear.
  3. Immediately, after service reminder goes out, press and hold the odometer reset. After 3 seconds a warning triangle will appear.
  4. Reset oil service light BMW 6 Series.
  5. Keep the odometer reset button pressed. After another 2-3 seconds the oil-can symbol will appear. If you hold the button too long, about 10 seconds, the system will go into an internal coding mode. In this case, shut everything down and start over.
  6. After properly performing step-3, the system will be in the service menu mode. Use the push button (BC button) on the end of the left steering column switch (wipers, high/low beams) to scroll through the various service items.
  7. When the oil service light is displayed, press the BC button on the end of wiper switch. “Reset” should now appear in the display. Press and hold the BC button for 2-3 seconds. A small clock display will show as the reset is being performed.
  8. Reset oil service light BMW 6 Series E63, picture below.
  9. Reset oil service light BMW 6 Series 2.
  10. You can now select another item to reset (as in step-4) or press the START/STOP button to end.

 

Reset oil service light BMW 6 Series E64. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010.

How do you reset oil service light BMW 6 Series model E64.

  1. Insert key.
  2. Press START/STOP button without pressing clutch/brake, wait for the service reminder to disappear.
  3. Immediately, after service reminder goes out, press and hold the odometer reset. After 3 seconds a warning triangle will appear.
  4. Reset oil service light BMW 6 Series 3.
  5. Keep the odometer reset button pressed. After another 2-3 seconds the oil-can symbol will appear. If you hold the button too long, about 10 seconds, the system will go into an internal coding mode. In this case, shut everything down and start over.
  6. After properly performing step-3, the system will be in the service menu mode. Use the push button (BC button) on the end of the left steering column switch (wipers, high/low beams) to scroll through the various service items.
  7. When the oil service light is displayed, press the BC button on the end of wiper switch. “Reset” should now appear in the display. Press and hold the BC button for 2-3 seconds. A small clock display will show as the reset is being performed.
  8. Reset oil service light BMW 6 Series E64, picture below.
  9. Reset oil service light BMW 6 Series 4.
  10. You can now select another item to reset (as in step-4) or press the START/STOP button to end.

 

That it is the full procedure how to reset oil service light BMW 6 Series. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for BMW cars. Or any error which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

 This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

 

Reset service light indicator BMW 7 Series

Leave a reply

Reset oil service light BMW 7 Series. For models: BMW E32, BMW E38, BMW E65, BMW E66, BMW F01, BMW F02.

Reset oil service light BMW 7 Series model E38. From years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001.

How do you reset oil service light BMW 7 Series model E38.

  1. Ignition key must be off.
  2. Press and hold the trip odometer reset button in the instrument cluster (left button), and turn the ignition key to the first position.
  3. Keep the button pressed for approx 5 seconds until one of the following words appear in the display: “Oil Service” with “Reset”.
  4. The service due is shown with “reset” if the coded minimum consumption limit has been reached and resetting is possible. If “reset” is not shown, the minimum limit has not been reached and resetting is not possible.
  5. Press and hold the reset button again until the word “Reset” begins to flash.
  6. While the display is flashing, press the left button briefly to reset the service interval. After the display has shown the new interval the following will appear: “End SIA”.
  7. The system can only be reset again after  2.5 gal (10 liters) of fuel have been consumed.

 

Reset oil service light BMW 7 Series E65. From years: 2002, 2003, 2004, 2005, 2006, 2007, 2008.

How to reset oil service light BMW 7 Series E65.

  1. Insert key.
  2. Press START/STOP button without pressing clutch/brake, wait for the service reminder to disappear.
  3. Immediately, after service reminder goes out, press and hold the odometer reset. After 3 seconds a warning triangle will appear.
  4. Reset service light indicator BMW 7 Series

    .

  5. Keep the odometer reset button pressed. After another 2-3 seconds the oil-can symbol will appear. If you hold the button too long, about 10 seconds, the system will go into an internal coding mode. In this case, shut everything down and start over.
  6. After properly performing step-3, the system will be in the service menu mode. Use the push button (BC button) on the end of the left steering column switch (wipers, high/low beams) to scroll through the various service items.
  7. When the oil service light is displayed, press the BC button on the end of wiper switch. “Reset” should now appear in the display. Press and hold the BC button for 2-3 seconds. A small clock display will show as the reset is being performed.
  8. Reset oil service light BMW 7 Series E65, picture below.
  9. Reset service light indicator BMW 7 Series.
  10. You can now select another item to reset (as in step-4) or press the START/STOP button to end.

Reset oil service light BMW 7 Series model E66. From years: 2002, 2003, 2004, 2005, 2006, 2007, 2008.

How do you reset oil service light BMW 7 Series model E66.

  1. Insert key.
  2. Press START/STOP button without pressing clutch/brake, wait for the service reminder to disappear.
  3. Immediately, after service reminder goes out, press and hold the odometer reset. After 3 seconds a warning triangle will appear.
  4. Reset oil service.
  5. Keep the odometer reset button pressed. After another 2-3 seconds the oil-can symbol will appear. If you hold the button too long, about 10 seconds, the system will go into an internal coding mode. In this case, shut everything down and start over.
  6. After properly performing step-3, the system will be in the service menu mode. Use the push button (BC button) on the end of the left steering column switch (wipers, high/low beams) to scroll through the various service items.
  7. When the oil service light is displayed, press the BC button on the end of wiper switch. “Reset” should now appear in the display. Press and hold the BC button for 2-3 seconds. A small clock display will show as the reset is being performed.
  8. Reset oil service light BMW 7 Series E66, picture below.
  9. Reset oil service.
  10. You can now select another item to reset (as in step-4) or press the START/STOP button to end.

 

Reset oil service light BMW 7 Series

Leave a reply

Reset oil service light BMW 7 Series. For models: BMW E32, BMW E38, BMW E65, BMW E66, BMW F01, BMW F02.

Reset oil service light BMW 7 Series model E38. From years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001.

How do you reset oil service light BMW 7 Series model E38.

  1. Ignition key must be off.
  2. Press and hold the trip odometer reset button in the instrument cluster (left button), and turn the ignition key to the first position.
  3. Keep the button pressed for approx 5 seconds until one of the following words appear in the display: “Oil Service” with “Reset”.
  4. The service due is shown with “reset” if the coded minimum consumption limit has been reached and resetting is possible. If “reset” is not shown, the minimum limit has not been reached and resetting is not possible.
  5. Press and hold the reset button again until the word “Reset” begins to flash.
  6. While the display is flashing, press the left button briefly to reset the service interval. After the display has shown the new interval the following will appear: “End SIA”.
  7. The system can only be reset again after  2.5 gal (10 liters) of fuel have been consumed.

 

Reset oil service light BMW 7 Series E65. From years: 2002, 2003, 2004, 2005, 2006, 2007, 2008.

How to reset oil service light BMW 7 Series E65.

  1. Insert key.
  2. Press START/STOP button without pressing clutch/brake, wait for the service reminder to disappear.
  3. Immediately, after service reminder goes out, press and hold the odometer reset. After 3 seconds a warning triangle will appear.
  4. .
  5. Keep the odometer reset button pressed. After another 2-3 seconds the oil-can symbol will appear. If you hold the button too long, about 10 seconds, the system will go into an internal coding mode. In this case, shut everything down and start over.
  6. After properly performing step-3, the system will be in the service menu mode. Use the push button (BC button) on the end of the left steering column switch (wipers, high/low beams) to scroll through the various service items.
  7. When the oil service light is displayed, press the BC button on the end of wiper switch. “Reset” should now appear in the display. Press and hold the BC button for 2-3 seconds. A small clock display will show as the reset is being performed.
  8. Reset oil service light BMW 7 Series E65, picture below.
  9. .
  10. You can now select another item to reset (as in step-4) or press the START/STOP button to end.

Reset oil service light BMW 7 Series model E66. From years: 2002, 2003, 2004, 2005, 2006, 2007, 2008.

How do you reset oil service light BMW 7 Series model E66.

  1. Insert key.
  2. Press START/STOP button without pressing clutch/brake, wait for the service reminder to disappear.
  3. Immediately, after service reminder goes out, press and hold the odometer reset. After 3 seconds a warning triangle will appear.
  4. .
  5. Keep the odometer reset button pressed. After another 2-3 seconds the oil-can symbol will appear. If you hold the button too long, about 10 seconds, the system will go into an internal coding mode. In this case, shut everything down and start over.
  6. After properly performing step-3, the system will be in the service menu mode. Use the push button (BC button) on the end of the left steering column switch (wipers, high/low beams) to scroll through the various service items.
  7. When the oil service light is displayed, press the BC button on the end of wiper switch. “Reset” should now appear in the display. Press and hold the BC button for 2-3 seconds. A small clock display will show as the reset is being performed.
  8. Reset oil service light BMW 7 Series E66, picture below.
  9. .
  10. You can now select another item to reset (as in step-4) or press the START/STOP button to end.