Tag Archives: service light reset

Reset driving time indicator Skoda Citigo

Reset driving time indicator Skoda Citigo. From year: 2011, 2012, 2013.
Reset-service-Skoda-Citigo
1. The rocker switch A and the button B are located on the windscreen wiper lever.
2. Select memory.
3. Depress button B.
4. Selecting functions.
5. Briefly push the rocker switch A down or up, this opens the individual functions of the multifunction display one after the other.
6. Resetting, select the driving time indicator.
7. Push the button B for a few seconds.
8. The following readouts of the selected memory will be set to 0 by button B.

How to reset service light indicator Skoda Superb 1

1. Get in the car, with the ignition to off position
2. Press and hold right button on the dashboard.
3. Switch the ignition to on, do not start the vehicle.
4. Release, right button.
5. Now turn button located on the left on dash to the right in clockwise direction.
6. The service indicator was reset.

Reset service light indicator Renault Safrane

Reset service light indicator Renault Safrane. How to reset maintenance light, reset oil service light. Can be made manually by use button on car dash board.

Reset service light indicator Renault Safrane. It was built in years: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000.

1. The reset button is located on the bottom right hand side of the Rev counter on the instrument cluster.
2. Turn ON the ignition, do not start the vehicle.
3. Push reset button until Spanner warning light symbol will start flash.
4. Keep button depressed until Spanner warning light symbol stops flashing and remains illuminated.
5. Indicator shows appropriate service interval.
6. Release reset button.
7. Turn OFF the ignition and then start your Renault Sfrane to see if spanner warning light has been reset.

Note. Some vehicles are fitted with a SERV lamp, this is not a service interval indicator lamp, it is a malfunction indicator lamp (MIL).

Reset service light indicator Renault Scenic 2

Reset service light indicator Renault Scenic 2. From year: 2003, 2004, 2005, 2006, 2007, 2008, 2009.

How to reset service light indicator Renault Scenic 2.

1. Turn the ignition to ON position 2, don’t start the vehicle.
2. On cars with keycard ignition, insert the card, then push & hold the start button for 5 seconds to turn on the dashboard cluster lights.
3. Push & button on the end of the wiper stalk repeatedly until the warning spanner symbol and miles to service appears on the monitor, some models have 2 buttons, which cycle through the options in opposite directions, either button can be used in this case.
4. Push & hold the button.
5. The display will now change to the new service interval and start flashing.
6. Keep holding the button until the display stops flashing.
7. Release the button, turn ignition to off and start the car to see if warning light has been reset.

Reset service light indicator Renault Modus

Reset service light indicator Renault Modus. From year: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

How to reset service light indicator Renault Modus.

1. To reset the mileage before service on a Renault Modus, follow this steps.
2. Select the miles/km to service display on the trip computer.
3.Repeatedly push and hold one of the two buttons on the end of the windscreen wiper stalk for about 10 seconds until the mileage is reset and the display shows the mileage before maintenance service permanently.