How to reset service light indicator Skoda Yeti.
Reset service light indicator Skoda Yeti. From year: 2009, 2010, 2011, 2012, 2013.
Service now!
Displaying the distance and days until the next service maintenance. You can use the button 3 to display the remaining distance and days until the next service maintenance, see above picture.
A key symbol 
Skoda key service and the remaining distance appear for 10 seconds in the display. At the same time, the remaining days until the next service maintenance are displayed.
On cars which are equipped with the information display, you can call up this display in the menu Settings, see info below.
The following will be displayed in the information display for 10 seconds:
Service in … km or… days.
Resetting Service Interval Display Skoda Yeti.
It is only possible to reset the Service Interval Display, if a service message or at least a pre-warning is shown in the instrument cluster display.
We recommend that this reset is completed by a specialist garage.
The specialist garage:
- resets the memory of the display after the appropriate inspection;
- adds an entry to the Service Schedule;
- affix the sticker with the entry of the following service interval to the side of the dash panel on the driver’s side.
- Reset the service interval display by using the reset button 7, see above picture.
On vehicles which are equipped with the information display, you can reset the Service Interval Display in the menu Settings, see info below.
We recommend that you do not reset the Service Interval Display yourself as this can result in the incorrect setting of the Service Interval Display, which can also cause possible problems with the operation of your vehicle.
- Never reset the display between service intervals, as this will result in the incorrect display.
- Information is retained in the Service Interval Display also after the battery of the vehicle is disconnected.
- If the instrument cluster is exchanged after a repair, the correct values must be entered in the counter for the Service Interval Display. This work is carried out by a specialist garage.
- After resetting the display with flexible service intervals, the displayed data is the same as that for a vehicle with fixed service intervals. We therefore recommend that the Service Interval Display is only reset by a ŠKODA Service Partner, who will reset the display with a vehicle system tester.
- Please refer to the Service Plan for detailed information about the service intervals.
Operating with the buttons on the windshield wiper lever.
- You can activate the Main menu by pressing the rocker switch A, for more than 1 second.
- Individual menu points can be selected by means of the rocker switch A . When the pushbutton B is briefly pressed, the information you have selected is displayed.
Operating with the buttons on the multifunction steering wheel.
- You can activate the Main menu by pressing the rocker switch C for more than 1 second.
- By briefly pressing the C button you will reach one level higher.
- The individual menus can be selected by pressing the adjustment wheel D.
- The selected menu is displayed after briefly pressing the adjustment wheel D.
The following information can be selected (depending on the equipment installed on the vehicle):
- MFD
- Audio
- Navigation
- Phone
- Aux. Heating
- Assistants
- Vehicle status
- Settings
Note:
- If warning messages are shown in the information display, these messages must be confirmed with the button B on the windshield wiper lever or with the button D on the multifunction steering wheel to call up the main menu.
- If the information display is not activated at that moment, the menu always shifts to one of the higher levels after approx. 10 seconds.
- The operation of the factory-fitted radio or navigation system is described in separate operating instructions to be found in the on-board literature.
You can change certain settings by means of the information display. The current setting is shown on the information display in the respective menu at the top below the line.
The following information can be selected (depending on the equipment installed on the vehicle):
- Language
- MFD Data
- Convenience
- Lights & Vision
- Time
- Winter tyres
- Units
- Assistants
- Alternative speed displayed
- Service
- Factory setting
- Back
After selecting the menu point Back you will reach one level higher in the menu.
Service
Here you can have the remaining kilometres and days until the next service interval displayed, and reset the Service Interval Display.
