Tag Archives: service intervals

Reset service light oil life indicator dashboard Infiniti Q50

Leave a reply

How do you reset maintenance light, reset service light indicator Infiniti Q50, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Infiniti Q50, year 2014, 2015 oil reset instructions:

  1. Turn the ignition on without starting the engine (press START/STOP) button.
  2. Using the lower center console display press the MENU button.
  3. From the MENU screen select SETTINGS.
  4. From the SETTINGS screen select METER.
  5. From the METER screen select Maintenance. Select the Maintenance item (i.e. Oil and Filter) to reset or change service intervals.
  6. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset oil service light indicator Fiat Ducato 3

Leave a reply

How do you reset maintenance light, reset service light indicator Fiat Ducato 3. For reset maintenance light and that can be made manually by use button on car dash board. From year : 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

How to reset warning service light on a Fiat Ducato III.

Scheduled servicing ( service ) Fiat Ducato third generation.

Through this function it is possible to display information connected to proper vehicle servicing.

Proceed as follows:

  • Briefly press button MODE: service in km or mi, according to previous setting, will be displayed see paragraph “Units”.
  • Briefly press button MODE to go back to the menu screen or press the button for long to go back to the standard screen.

The “Service schedule” plans different service intervals according to engine models; service interval is displayed automatically, with the ignition key at MAR, starting from 2,000 km (or 1,240 mi) from this deadline and it is shown again every 200 km (or 124 mi). Oil change warning messages are displayed in the same way. Use buttons ▲ and ▼ to display alternately service schedule info and engine oil change info. Below 200 km servicing indications are displayed more frequently. Service indications will be displayed in km or mi according to previous unit setting. When a programmed maintenance interval (coupon) is near to come, turning the ignition key to MAR, the display will show the message “ Service ” followed by the number of km/mi to go before vehicle servicing. Contact a Fiat Dealership to carry out any service operation provided by the “Service schedule” and to reset the display.

Oil reset service light indicator Opel Agila

Leave a reply

How to reset service light indicator Opel Agila A. From years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007.

Reset service light indicator Opel Agila. From years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

  1. Ignition OFF, the display in the instrument cluster must show the trip odometer.
  2. Press and hold trip odometer button.
  3. Turn on the ignition.
  4. Keep trip odometer button button pressed for at least 15 seconds longer until the service interval indicator changes.
  5. After approximately 15 seconds the display on the instrument cluster displays the symbol with the maximum mileage (km) and InSP for 2 seconds.
  6. After a successful reset, the message “- – – -” appears in the display until the actuating knob is released.
  7. Then the distance travelled or the time display appears again.

How do you reset service light indicator Opel Agila B. From years: 2008, 2009, 2010, 2011, 2012.

  1. Start with key in, ignition OFF.
  2. Press and hold both buttons (clock button and trip reset button) on the instrument cluster button.
  3. Turn ignition ON, do not start the car.
  4. Keep holding clock button and trip reset button until on the display will appear InSP message, the indicator will flash three times and change to three dashes “- – – “.
  5. Release the buttons.
  6. Turn ignition OFF.
  7. Turn ignition back ON to confirm that the service light indicator was reset.

In the case of vehicles with fixed engine oil change and service intervals, InSP appears in the odometer display if the ignition is switched on when servicing is overdue: have the next service carried out within one week or 300 miles (500 km). Seek the assistance of a workshop. After the service is complete, have the display reset.

Indicates when the engine oil and oil filter require changing. Based on driving conditions, the interval at which an oil change will be indicated can vary considerably. When the system has calculated that oil life has been diminished, control indicator I flashes in the instrument cluster when the engine is running. Engine oil and oil filter need changing immediately. Engine power may be decreased. For the system to work properly, it must be reset every time the engine oil and oil filter are changed: seek the assistance of a workshop.

Oil reset service light indicator Opel Combo

Leave a reply

How to reset service light indicator Opel Combo.

Reset service light indicator Opel Combo. From years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

  1. Ignition OFF.
  2. Press and hold reset trip odometer button.
  3. Turn the ignition on, one position before starting engine.
  4. The letters INSP will appear in the display and they will flash for couple seconds.
  5. Kepp the trip odometer button pressed until the text “- – – “ appears in the display.
  6. Release trip odometer button and switch ignition off.

Another way to reset service light indicator Opel Combo is.

  1. Get into the car and shut the door.
  2. Press and hold trip reset button.
  3. After a couple seconds you will see leters “InSp 0″ on display.
  4. Keep holding trip reset button and press and hold the trip reset button.
  5. Switch ignition on, one position before starting engine.
  6. On the display will appear this message “InSP” and under InSP this “- – – -”.
  7. Continue to hold the trip button and brake pedal for about 15 seconds.
  8. At this point it should flash up “InSP —” and then the reset mileage 19000 (in some cases instead of 19000 will appear other number, for example 15000 or 30000).
  9. You can release the trip button and brake pedal and the indicator is reset.

When service is due, InSP ap pears in the odom eter display for approxima tely 10 second s w hen the ignition is switched on. Have the next service performed by a workshop within one week or 300 miles (500 km ), whichever occurs first.

The length of the service intervals is based on several parameters stemming from usage. For this reason, various engine-spec ific data is continually gathered and is used to calculate the remaining distance until the next servic e. If the remaining dista nce is less than 1000 m iles (1500 km), InSP is displa yed with a remaining distance of than 600 m iles (1000 km ) when the ignition is switched on and off. If less than 600 miles (1000 km ) remain, InSP is displayed for severa l second s. Have the next service performed within one week or 300 miles (500 km), whichever occ urs first.

Oil reset service light indicator Opel Combo C

Leave a reply

How to reset service light indicator Opel Combo C.

Reset service light indicator Opel Combo C. From years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

  1. Ignition OFF.
  2. Press and hold reset trip odometer button.
  3. Turn the ignition on, one position before starting engine.
  4. The letters INSP will appear in the display and they will flash for couple seconds.
  5. Kepp the trip odometer button pressed until the text “- – – “ appears in the display.
  6. Release trip odometer button and switch ignition off.

Another way to reset service light indicator Opel Combo C is.

  1. Get into the car and shut the door.
  2. Press and hold trip reset button.
  3. After a couple seconds you will see leters “InSp 0″ on display.
  4. Keep holding trip reset button and press and hold the trip reset button.
  5. Switch ignition on, one position before starting engine.
  6. On the display will appear this message “InSP” and under InSP this “- – – -”.
  7. Continue to hold the trip button and brake pedal for about 15 seconds.
  8. At this point it should flash up “InSP —” and then the reset mileage 19000 (in some cases instead of 19000 will appear other number, for example 15000 or 30000).
  9. You can release the trip button and brake pedal and the indicator is reset.

When service is due, InSP ap pears in the odom eter display for approxima tely 10 second s w hen the ignition is switched on. Have the next service performed by a workshop within one week or 300 miles (500 km ), whichever occurs first.

The length of the service intervals is based on several parameters stemming from usage. For this reason, various engine-spec ific data is continually gathered and is used to calculate the remaining distance until the next servic e. If the remaining dista nce is less than 1000 m iles (1500 km), InSP is displa yed with a remaining distance of than 600 m iles (1000 km ) when the ignition is switched on and off. If less than 600 miles (1000 km ) remain, InSP is displayed for severa l second s. Have the next service performed within one week or 300 miles (500 km), whichever occ urs first.