Tag Archives: service interval

Oil reset service light indicator Volkswagen VW Golf 7

How do you reset maintenance light, reset service light indicator VW Golf 7, year , 2013, 2014, 2015. For reset maintenance light and that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life VW Golf 7, year 2013, 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Acess the settings menu:
     a) Use the windshield wiper lever toggle switch or
     b) Use the buttons on the right hand side of the multi function steering wheel
  3. Select the “Settings” menu followed by the “Service” submenu. Select “Reset” and confirm.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

or

  1. With the ignition switch off press and hold the 0,0 button.
  2. Turn the igntion on (do not start the engine) and the service interval display is now in reset mode.
  3. Release the 0,0 button.
  4. Within 20 seconds press the min button and wait for the display to switch back to the normal display.
  5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil reset service light indicator Land Rover Discovery 3

Reset service light indicator Land Rover Discovery 3. How to reset maintenance light, reset oil service light. Can be made manually by use button on car dash board.

Reset service light indicator Land Rover Discovery 3.

Procedure to check/reset service status, distance counter on a Land Rover Discovery 3.

  1. Switch ignition OFF.
  2. Press and Hold left instrument panel reset button, switch ignition ON to position I (accessories).
  3. Keep reset button pressed for approximately 5 seconds until the LCD displays RESET SIA.
  4. The distance to service (e.g. 2150 miles) and the service type (e.g. Inspection/oil service) will be displayed.
  5. Has the Reset Distance limit been reached or exceeded? o NO.
  6. Follow instructions in section 2 below o YES Follow Reset Distance Counter instructions below Reset Distance counter procedure.
  7. Press and hold left instrument reset button for 5 seconds. RESET will begin to flash on the LCD display.
  8. To reset distance the left hand button should be pressed before the RESET message has flashed 5 times. The LCD will display END SIA. Switch ignition off.

Procedure to check/reset service status date counter on a Land Rover Discovery 3.

  1. Press left instrument panel reset button once.
  2. The LCD will display RESET SIA followed by the service due date.
  3. Has the Reset Date limit been reached or exceeded? o NO.
  4. Press the left instrument button once.
  5. The LCD will display END SIA to indicate the service interval check/reset procedure has been cancelled. o YES, Follow Reset Date Counter instructions below Reset Date counter procedure.
  6. Press and hold left instrument reset button for 5 seconds.
  7. RESET will begin to flash on the LCD display.
  8. To reset distance the left hand button should be pressed before the RESET message has flashed 5 times.
  9. The LCD will display END SIA. Switch ignition off.

oil-reset-service-light-indicator-Land-Rover-Discovery-3

Oil reset service light indicator Opel Agila A

How to reset service light indicator Opel Agila A. From years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007.

Reset service light indicator Opel Agila A. From years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

  1. Ignition OFF, the display in the instrument cluster must show the trip odometer.
  2. Press and hold trip odometer button.
  3. Turn on the ignition.
  4. Keep trip odometer button button pressed for at least 15 seconds longer until the service interval indicator changes.
  5. After approximately 15 seconds the display on the instrument cluster displays the symbol with the maximum mileage (km) and InSP for 2 seconds.
  6. After a successful reset, the message “- – – -” appears in the display until the actuating knob is released.
  7. Then the distance travelled or the time display appears again.

Oil reset service light Citroen C3 second generation

Reset service light indicator, engine oil life Citroen C3 V, year 2009, 2010, 2011, 2012, 2013, 2014. reset instructions:

How to reset spanner maintenance light on a Citroen C3 II generation.

For 5 seconds after the ignition is switched on, the spanner fl ashes to indicate that the service must be carried out as soon as possible.

Example: the service is overdue by 300 km.

For 5 seconds after the ignition is switched on, the display indicates:

-180 MILES / 300 KM

5 seconds after the ignition is switched on, the distance recorder resumes its normal operation. The spanner remains lit .

12680 MILES / 20300 KM

The distance remaining may be weighted by the time factor, depending on the driver’s driving habits. Therefore, the spanner may also come on if you have exceeded the two year service interval.

Reset service light Citroen C3 second generation procedure below:

The procedure for resetting to zero is as follows:

  • Switch off the ignition.
  • Press and hold the trip distance recorder zero reset button.
  • Switch on the ignition; the distance recorder display begins a countdown.
  • When the display indicates “=0″ , release the button; the spanner disappears.

Following this operation, if you wish to disconnect the battery, lock the vehicle and wait at least fi ve minutes for the zero reset to be taken into account.

Retrieving the service information.

You can access the service information at any time.

Press the trip distance recorder zero reset button.

The service information is displayed for a few seconds, then disappears.

All information how to reset service light is taken from Citroen C3 second generation owners manual.

Oil reset service light indicator Skoda Fabia Mk1

How to reset service light indicator Skoda Fabia Mk1.

Reset service light indicator Skoda Fabia Mk1. From year: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007.

  1. With the ignition off, with all doors closed.
  2. Press and hold the button situated on the right of the dashboard, next to mileage (km/h)
  3. Turn the ignition to on, without starting the engine.
  4. Release the button and pressed again fore 1 second until the display shows service InSP message
  5. Rotat the same button to the right, until service – – – is displayed
  6. Now press again the button and that was it, the service interval has been reset.