Tag Archives: procedure

Service light reset dashboard BMW X5 and BMW X6

Leave a reply

How do you reset maintenance light, reset service light indicator BMW X5 and BMW X6, year 2000-2013. For reset maintenance light and that can be made manually by use button on car dashboard.

Reset oil service light, engine oil life BMW X5 and BMW X6, year 2000-2013 oil reset instructions:

  1. Turn the ignition to the ON position with the vehicle off (close all doors and windows and put the vehicle in park)
  2. Press and hold the TRIP reset button for about 10 seconds until the first service job appears in the display
  3. Release the button and press it again repeatedly to select the desired maintenance item to reset (oil can indicates the oil change)
  4. To reset, press and hold the TRIP button again fro 3-5 seconds or until the display shows “Reset?”
  5. Release the button, then press and hold it again for another 3 seconds or until the display shows “—-”, then release the button
  6. Repeat the above procedure for any other services to be reset e.i., brakes, spark plugs, or filters
  7. Turn the ignition to the OFF position and back on to confirm reset was successful

Reset change oil light indicator service Fiat 500

Leave a reply

How do you reset maintenance light, reset service light indicator Fiat 500, from year: 2014, 2015. For reset maintenance light and that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life Fiat 500, oil reset instructions:

How to reset change oil indicator system Fiat 500.

  1. Turn the ignition to run (one position before starting engine).
  2. Fully depress the accelerator pedal slowly three times within 10 seconds.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset open door warning light Toyota Land Cruiser 100 series

Leave a reply

How to reset open door warning light Toyota Land Cruiser 100 series.

Reset open door warning light Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

This light remains on until all the side doors and back door are completely closed.

Below is a picture of how it looks the Toyota Land Cruiser 100 series open door warning light.

Reset-open-door-warning-light-Toyota-Land-Cruiser-100-series

All this information they are taken from Toyota Land Cruiser 100 series owners manual. If the above procedure is not working means that you have damage a sensor. Before you panic check if you have not got the seatbelt in the door.

Oil reset service light indicator Chevrolet Malibu

Leave a reply

How do you reset oil service light Chevrolet Malibu. From years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

Reset oil service light Chevrolet Malibu.

The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use. Whenever the oil is changed, reset the system so it can calculate when the next oil change is required. If a situation accurs where you change the oil prior to a CHANGE OIL SOON message being turned on, reset the system.

To reset oil service light on your vehicle Chevrolet Malibu follow this steps:

  • Display OIL LIFE RESET on the dash board.
  • Press and hold the INFO button & ENTER button (in the same time) buttons for at least one second.
  • OIL LIFE RESET will display.
  • Hit ENTER button again and an ACKNOWLEDGED display message will appear for three seconds.
  • This tells you the system has been reset.
  • Turn the key to LOCK/OFF.

If the CHANGE OIL SOON message comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure.

Oil reset service light indicator Chevrolet Impala

Leave a reply

How do you reset oil service light Chevrolet Impala. From years: 1999 – 2012.

Reset oil service light Chevrolet Impala. From years: 1999, 2000, 2001, 2002, 2003, 2004, 2005.

The GM Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a CHNAGE ENGINE OIL message being turned on, reset the system.

After changing the engine oil, the system must be reset.

To reset the CHANGE ENGINE OIL message use one of the folloqing procedures.

Reset oil service light Chevrolet Impala, using the radio. From years: 1999, 2000, 2001, 2002, 2003, 2004, 2005.

  • Turn the ignition to ACC or ON, with the radio off.
  • Press and hold the TUNE DISP knob on the radio for at least five seconds until SETTINGS is displayed.
  • Press the SEEK PSCAN up or down arrow to scroll through the main menu.
  • Scroll until OIL LIFE appears on the display.
  • Press the 1 PREV or 2 NEXT buttons to enter the submenu. Reset will be displayed.
  • Press the TUNE DISP knob to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second.
  • Once the indicator has been reset, scroll until EXIT appears on the display.
  • Press the TUNE DISP knob to exit programming. A chime will be heard to verify the exit.
  • Turn the key to OFF.
  • If the CHANGE ENGINE OIL message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.

Reset oil service light Chevrolet Impala, using the accelerator pedal. From years: 1999, 2000, 2001, 2002, 2003, 2004, 2005.

  • Turn the ignition to ON, with the engine off.
  • Fully press and release the accelerator pedal slowly three times within five seconds. If the CHANGE ENGINE OIL message flashes, the system is reset.
  • However, if it stays on, it did not reset. Repeat the procedure.
  • Turn the key to OFF.
  • If the CHANGE ENGINE OIL message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.

All information is taken from the Chevrolet Impala manual.

How to reset oil service light Chevrolet Impala. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.

How to Reset the Engine Oil Life System Chevrolet Impala.

The Engine Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you
change your oil prior to a CHANGE ENGINE OIL SOON message being turned on, reset the system.

Always reset the engine oil life to 100% after every oil change. It will not reset itself. To reset the Engine Oil Life System for Chevrolet impala, do the following:

  • Display the OIL LIFE REMAINING on the DIC.
  • Press and hold the SET/RESET button on the DIC for more than five seconds. The oil life will change to 100%.
  • If the CHANGE ENGINE OIL SOON message comes back on when you start your vehicle, the Engine Oil Life System has not reset. Repeat the procedure.

All information is taken from the Chevrolet Impala manual.