Tag Archives: position

Reset service light oil life indicator dashboard Jeep Wrangler

Leave a reply

How do you reset maintenance light, reset service light indicator Jeep Wrangler, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Jeep Wrangler, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run.
    *one position before starting engine
  2. Fully depress the accelerator pedal slowly three times within 10 seconds.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Scion tC

Leave a reply

How do you reset maintenance light, reset service light indicator Scion tC, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Scion tC, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Select trip metre A reading by using the trip metre button and then turn the ignition off.
  3. While pressing the trip meter reset button, turn the ignition switch to run (one position before starting engine).
  4. Continue to press and hold the button until the trip meter displays “000000”.
  5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Ford Focus

Leave a reply

How do you reset maintenance light, reset service light indicator Ford Focus, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Ford Focus, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run.
    *one position before starting engine
  2. Press the brake and gas pedals at the same time; after 3 seconds the “Service: Oil reset in prog.” message will appear and after 25 seconds the “Service: Oil reset complete” message will appear.
  3. Release the brake and gas pedals.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Toyota RAV4

Leave a reply

How do you reset maintenance light, reset service light indicator Toyota RAV4, year 2013, 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Toyota RAV4, year 2013, 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Ensure Trip Metre A reading is shown. Turn the ignition off.
  3. While pressing the DISP button turn the igniton on (do not start the engine).
  4. Continue to press and hold the button until the trip meter displays “000000”.
  5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Volkswagen Tiguan

Leave a reply

How do you reset maintenance light, reset service light indicator Volkswagen (VW) Tiguan, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Volkswagen (VW) Tiguan, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run.
    *one position before starting engine
  2. Press and HOLD the trip-odometer button “0.0”.
  3. Turn your key to run (one position before starting engine).
  4. Release the trip-odometer button.
  5. Push and release the Clock Minute Set Button “min”.

or
* Use the rocker switch on the windshield wiper lever to select “Settings” and confirm with button underneath windshield wiper lever then follow steps 2a-3a.

or

  • 1a. Use the buttons on the right hand side of the multi function steering wheel
  • 2a. Select the “Settings” menu followed by the “Service” submenu. Select “Reset” and confirm.
  • 3a. Turn the ignition off and then start the engine to verify the indicator has been reset.