Tag Archives: OIL RESET

Maintenance Oil Light Reset Toyota Highlander 2013

Leave a reply

How do you reset maintenance light, reset service light indicator Toyota Highlander, year 2012, 2013, 2014. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Toyota Highlander, oil reset instructions:

Vehicles without smart key system

  1. Turn the ignition to run (one position before starting engine).
  2. Ensure Trip Metre A reading is shown. Turn the ignition off. (Go to step 3)

Vehicles with smart key system

  1. Press the “ENGINE START STOP” switch once (do not start engine).
  2. Ensure Trip Metre A reading is shown. Turn the ignition off.
  3. While pressing the Trip Meter reset button, press the “ENGINE START STOP” switch once (do not start engine).
    Without multi-information display: Continue to press and hold the button until the trip meter displays “000000”.
    With multi-information display: Continue to press and hold the button until “COMPLETE” appears on the multi-information display.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

How reset oil light GMC Yukon

Leave a reply

How do you reset maintenance light, reset service light indicator GMC Yukon. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life GMC Yukon, oil reset instructions:

year 2000-2006

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the Change Oil Soon light flashes the system is resetting.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

year 2007-2013

1. Turn the ignition to run (one position before starting engine).
2. *Display the OIL LIFE REMAINING on the DIC (i button). If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display by pressing the trip odometer reset stem.
3. Press and hold the SET/RESET (check mark) button on the DIC , or the trip odometer reset stem if vehicle does not have DIC buttons for more than 5 seconds. The oil life will change to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
*Remaining oil life can also be reset by depressing the gas pedal 3 times within 5 seconds instead of using the DIC.

How reset oil light GMC Savana Van

Leave a reply

How do you reset maintenance light, reset service light indicator GMC Savana Van. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life GMC Savana Van, oil reset instructions:

year 2003-2009

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the Change Oil Soon light flashes the system is resetting.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

year 2010-2013

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

 

How reset oil light GMC Envoy

Leave a reply

How do you reset maintenance light, reset service light indicator GMC Envoy. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life GMC Envoy, oil reset instructions:

year 2004-2009

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the Change Oil Soon light flashes the system is resetting.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil light reset maintenance Buick Terraza

Leave a reply

Reset service light indicator, engine oil life Buick Terraza, year 2005, 2006, 2007 reset instructions:

1. Turn the ignition to run (one position before starting engine).
2. Push the SET/RESET button until OIL is displayed on the Driver Information Centre.
3. Once OIL is displayed, push and hold the SET/RESET button for 5 seconds until 100% appears.
4. Turn the ignition off and start the engine to verify the indicator has been reset.