Tag Archives: OIL LIFE REMAINING

Reset service light oil life indicator dashboard Chevrolet Silverado

Leave a reply

How do you reset maintenance light, reset service light indicator Chevrolet Silverado, year 2013, 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Chevrolet Silverado, year 2013, 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. *Display the OIL LIFE REMAINING on the DIC (i button). If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display by pressing the trip odometer reset stem.
  3. Press and hold the SET/RESET (arrow) button on the DIC, or the trip odometer reset stem if the vehicle does not have DIC buttons for more than 5 seconds. The oil life will change to 100%.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.
    *Remaining oil life can also be reset by depressing the gas pedal 3 times within 5 seconds instead of using the DIC.

Reset service light oil life indicator dashboard Chevrolet Corvette

Leave a reply

How do you reset maintenance light, reset service light indicator Chevrolet Corvette, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Chevrolet Corvette, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run
    *one position before starting engine.
  2. Use the DIC arrow buttons on the right side of the steering wheel to display OIL LIFE REMAINING.
  3. Press and hold the SEL button until REMAINING OIL LIFE 100% appears.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Buick Enclave

Leave a reply

How do you reset maintenance light, reset service light indicator Buick Enclave, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Buick Enclave, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Press the vehicle information button (i) until OIL LIFE REMAINING displays.
  3. Press and hold the SET/RESET (check mark) button until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
  4. Start the engine and verify CHANGE OIL SOON light goes out (if this does not happen, turn off the engine and repeat steps).

Oil reset service light indicator Chevrolet Impala

Leave a reply

How do you reset oil service light Chevrolet Impala. From years: 1999 – 2012.

Reset oil service light Chevrolet Impala. From years: 1999, 2000, 2001, 2002, 2003, 2004, 2005.

The GM Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a CHNAGE ENGINE OIL message being turned on, reset the system.

After changing the engine oil, the system must be reset.

To reset the CHANGE ENGINE OIL message use one of the folloqing procedures.

Reset oil service light Chevrolet Impala, using the radio. From years: 1999, 2000, 2001, 2002, 2003, 2004, 2005.

  • Turn the ignition to ACC or ON, with the radio off.
  • Press and hold the TUNE DISP knob on the radio for at least five seconds until SETTINGS is displayed.
  • Press the SEEK PSCAN up or down arrow to scroll through the main menu.
  • Scroll until OIL LIFE appears on the display.
  • Press the 1 PREV or 2 NEXT buttons to enter the submenu. Reset will be displayed.
  • Press the TUNE DISP knob to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second.
  • Once the indicator has been reset, scroll until EXIT appears on the display.
  • Press the TUNE DISP knob to exit programming. A chime will be heard to verify the exit.
  • Turn the key to OFF.
  • If the CHANGE ENGINE OIL message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.

Reset oil service light Chevrolet Impala, using the accelerator pedal. From years: 1999, 2000, 2001, 2002, 2003, 2004, 2005.

  • Turn the ignition to ON, with the engine off.
  • Fully press and release the accelerator pedal slowly three times within five seconds. If the CHANGE ENGINE OIL message flashes, the system is reset.
  • However, if it stays on, it did not reset. Repeat the procedure.
  • Turn the key to OFF.
  • If the CHANGE ENGINE OIL message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.

All information is taken from the Chevrolet Impala manual.

How to reset oil service light Chevrolet Impala. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.

How to Reset the Engine Oil Life System Chevrolet Impala.

The Engine Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you
change your oil prior to a CHANGE ENGINE OIL SOON message being turned on, reset the system.

Always reset the engine oil life to 100% after every oil change. It will not reset itself. To reset the Engine Oil Life System for Chevrolet impala, do the following:

  • Display the OIL LIFE REMAINING on the DIC.
  • Press and hold the SET/RESET button on the DIC for more than five seconds. The oil life will change to 100%.
  • If the CHANGE ENGINE OIL SOON message comes back on when you start your vehicle, the Engine Oil Life System has not reset. Repeat the procedure.

All information is taken from the Chevrolet Impala manual.

Reset oil service light indicator Chevrolet Corvette

Leave a reply

Reset service light indicator, engine oil life Chevrolet Corvette, year: 1982-2010, oil reset instructions:

Reset oil service light indicator Chevrolet Corvette. Corvette C3 and C4 from years: 1982, 1983, 1984, 1985, 1986, 1987,  1988, 1989, 1990, 1991.  Corvette C4 from years: 1992, 1993, 1994, 1995, 1996. Corvette C5 from years: 1997, 1998, 1999, 2000. Corvette C6 and C5 from years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010.

How do you reset reset oil service light indicator Chevrolet Corvette. 

Third generation Chevrolet Corvette C3 and fourth generation Chevrolet Corvette C4.

From years: 1982, 1983, 1984, 1985, 1986, 1987,  1988, 1989, 1990, 1991.

  1. Turn the ignition to run, one click before starting. Press ENG/MET button and release. Then press ENG/MET button again within 5 seconds.
  2. Within 5 seconds of step 1. Press and hold the RANGE button until the change oil indicator begins to flash.
  3. Hold RANGE button until indicator stops flashing and goes out, about 10 seconds.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

 

How to reset reset oil service light indicator Chevrolet Corvette. 

Reset oil service light indicator Chevrolet Corvette C4, fourth generation.

From years: 1992, 1993, 1994, 1995, 1996.

  1. Turn the ignition to run, one position before starting engine.
  2. Press ENG MET button on the trip monitor and release. Then press and release again within 5 seconds.
  3. Within 5 seconds of step 2, press and hold GAUGES button on trip monitor.
  4. Hold GAUGES button until change oil lamp stops flashing and goes out.
  5. Turn the ignition off and then start the engine. Now you can to verify if the indicator has been reset.

The full procedure how to reset oil service light indicator Chevrolet Corvette.

Reset oil service light indicator Chevrolet Corvette C5, fifth generation.

From years: 1997, 1998, 1999, 2000.

  1. Turn the ignition to run, one position before starting engine.
  2. Press the TRIP button on the DIC switch to view various menu choices and stop on OIL LIFE REMAINING. A message will display the % of oil life remaining.
  3. Press and hold the RESET button on the DIC switch for at least 2 seconds. A message will display the % of oil life remaining as 99 percent.
  4. Turn the ignition off and then start the engine. Now verify that the indicator has been reset.

 

How can you reset oil service light indicator Chevrolet Corvette.

Reset oil service light indicator Chevrolet Corvette C6 and Corvette c5.

From years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010.

  1. Turn the ignition to run, one position before starting engine.
  2. Press the TRIP button so the oil life % is displayed.
  3. Press the RESET and hold for 2 seconds.  OIL LIFE REMAINING 100% will appear.
  4. Turn the ignition off and then start the engine. Now verify that the indicator has been reset.

 

That it is the full procedure how to reset oil service light Chevrolet Corvette. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Chevrolet cars. Or any error which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

 This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.