Reset service light indicator, engine oil life Audi Q5 (2.5), year 2009-2012 oil reset instructions:
2009-2012
“Audi recommends the use of a reset tool. *Depening on model
Oil service light indicator reset Audi Q5
Leave a reply
Tag Archives: model
Oil Service Light Reset Audi TT
Reset service light indicator, engine oil life Audi TT, year 2000-2004 oil reset instructions:
2000-2004
*Diagnostic Reset Tool Required
Manual Reset using DIS and Reset Knobs:
1. Turn off the ignition
2. Locate the Driver Information System (DIS) in the instrument panel.
3. Do the following to display the SERVICE! message in the display.
i) Press and hold the right RESET knob.
ii) Turn on the ignition – do not start the engine.
iii) Release the knob.
4. Do the following to display the next service interval (SERVICE IN ##MI)
i) Press and hold the right RESET knob.
ii) Release the knob.
5. Turn off the ignition.
6. Start the engine and verify indicator has been reset.
Manual Reset for 2000 only:
1. Turn off the ignition.
2. Press and hold the TRIP RECORDER reset button on the instrument cluster and turn on the ignition.
3. Release the button. The display will show SERVICE IN —MI or SERVICE.
4. Within 5 seconds
5. Turn off the ignition.
6. Start the engine and verify indicator has been reset.
2005-2007
1. Turn off the ignition.
2. Press and hold the button to the right of the LCD display in the instrument cluster.
3.Turn the ignition on (do not start the engine); the message “”SERVICE”” appears. Release button.”
4. Within 5 seconds
5. Turn off the ignition.
6. Start the engine and verify indicator has been reset.
2008-2012
“Audi recommends the use of a reset tool. *Depening on model
Reset oil service light BMW 7 Series
Reset oil service light BMW 7 Series. For models: BMW E32, BMW E38, BMW E65, BMW E66, BMW F01, BMW F02.
Reset oil service light BMW 7 Series model E38. From years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001.
How do you reset oil service light BMW 7 Series model E38.
- Ignition key must be off.
- Press and hold the trip odometer reset button in the instrument cluster (left button), and turn the ignition key to the first position.
- Keep the button pressed for approx 5 seconds until one of the following words appear in the display: “Oil Service” with “Reset”.
- The service due is shown with “reset” if the coded minimum consumption limit has been reached and resetting is possible. If “reset” is not shown, the minimum limit has not been reached and resetting is not possible.
- Press and hold the reset button again until the word “Reset” begins to flash.
- While the display is flashing, press the left button briefly to reset the service interval. After the display has shown the new interval the following will appear: “End SIA”.
- The system can only be reset again after 2.5 gal (10 liters) of fuel have been consumed.
Reset service light indicator Chrysler Grand Cherokee 1995-2005
Reset service light indicator, engine oil life Chrysler Grand Cherokee, year 1995 , 1996 , 1997 , 1998 , 1999 , 2000 , 2002 , 2003 , 2004 , 2005 reset instructions:
1.Switch ignition on
2.Keep pushing the button that reads ‘step’ on the centre console untill the display shows the service interval.
3.Press the reset button for 3 seconds.
Reset service indicator Chrysler Voyager
Reset the service light indicator, engine oil life on Chrysler Voyager, years 2001 , 2002 , 2003 , 2004 , 2005 , 2006 , 2007 , 2008, oil reset instructions for this model as follows:
1.Swith ignition on.
2.Press the menu reset button untill the service interval is displayed.
3.Repeatedly press the Step button untill to set mileage to next service.
4.Press the C/T button untill the display changes.
5.Tap the Step button untill ‘yes’ appears.
6.Press tghe C/T button then switch off ignition