Tag Archives: light

Reset low windshield washer fluid level warning light Toyota Solara

Leave a reply

Reset low windshield washer fluid level warning light Toyota Solara second generation. From year: 2004, 2005, 2006, 2007, 2008.

How to reset low windshield washer fluid level warning light Toyota Solara 2 generation.

The light warns that the windshield washer fluid level is too low. Add washer fluid at your earliest opportunity.

Adding washer fluid.

If any washer does not work or the low windshield washer fluid level warning light comes on, the washer tank may be empty. Add washer fluid. You may use plain water as washer fluid. However, in cold areas where temperatures range below the freezing point, use washer fluid containing antifreeze. This product is available at your Toyota dealer and most auto parts stores. Follow the manufacturer’s directions for how much to mix with water.

Do not use engine antifreeze or any other substitute because it may damage your vehicle’s paint.

If the low windshield washer fluid level warning light is not gone means that a sensor is broken.

All information how can tou reset low windshield washer fluid level warning light is taken from Toyota Solara ownes manual.

That it is the full procedure how to reset low windshield washer fluid level warning light Toyota Solara second generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

Reset VSC warning light Toyota Solara second generation

Leave a reply

Reset VSC warning light Toyota Solara second generation. From year: 2004, 2005, 2006, 2007, 2008.

How to reset VSC warning light Toyota Solara 2 generation.

The light warns that there is a problem somewhere in the vehicle stability control system or traction control system. The light will come on when the ignition key is turned to “ON”, and will go off after about a few seconds.

If the light comes on while driving, the system does not work. However, as conventional braking operates when applied, there is no problem to continue your driving.

In the following cases, contact your Toyota dealer:

  • The warning light does not come on after the ignition key is turned to “ON”.
  • The warning light remains on after the ignition key is turned to “ON”.
  • The warning light comes on while driving.

The “TRAC OFF” indicator light will come on when the “VSC” warning light comes on even if the “TRAC OFF” switch is not pushed.

All information how can you reset VSC warning light is taken from Toyota Solara second generation owners manual.

That it is the full procedure how to reset VSC warning light Toyota Solara second generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

How to check service reminder light Toyota Solara 2 generation

Leave a reply

How to check service reminder light Toyota Solara 2 generation. From year: 2004, 2005, 2006, 2007, 2008.

How can you check service reminder light Toyota Solara second generation.

CHECKING SERVICE REMINDER INDICATORS except the low fuel level warning light and low windshield washer fluid level warning ligh).

  1. Apply the parking brake.
  2. Open one of the doors. The open door warning light should come on.
  3. Close the door. The open door warning light should go off.
  4. Turn the ignition key to “ON”, but do not start the engine. All the service reminder indicators except the open door warning light should come on. The “ABS”, “VSC” and low tire pressure warning lights, engine oil replacement reminder light, “TRAC OFF” and slip indicator lights go off after a few seconds. The SRS warning light goes off after about 6 seconds.

If any service reminder indicator or warning buzzer does not function as described above, have it checked by your Toyota dealer as soon as possible.

All information how to check service reminder light is taken from Toyota Solara 2 generation owners manual.

That it is the full procedure how to check service reminder light Toyota Solara 2 generation Toyota Solara second generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

Reset oil service light Toyota Tacoma second generation

Leave a reply

Reset oil service light Toyota Tacoma second generation. From year: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

How to reset maint reqd service light Toyota Tacoma 2 generation.

Reset-oil-service-light-Toyota-Tacoma-second-generation.

Engine Oil Replacement Reminder Light (for vehicles sold in U.S.A.).

This light acts as a reminder to replace the engine oil. This light will come on when the ignition key is turned to “ON” and will go off after about a few seconds. When you drive for about 7200 km (4500 miles) after the engine oil replacement, this light illuminates for about 3 seconds and then flashes for about 12 seconds with the ignition key turned to the “ON” position. If you continue driving without replacing the engine oil, and if the distance driven exceeds 8000 km (5000 miles), the light will come on after the ignition key is turned to “ON” position. The light will remain on thereafter.

If the light is flashing, we recommend that you replace the engine oil at an early opportunity depending on the driving and road conditions. If the light comes on, replace it as soon as possible. The system must be reset after the engine oil replacement. Reset the system by the following procedure:

  1. Turn the ignition key to the “OFF” position with the odometer reading shown. For details, see “Odometer and two trip meters” in this category.
  2. Turn the ignition key to the “ON” position while holding down the trip meter reset knob. See below picture.
  3. How-to-reset-maint-reqd-service-light-Toyota-Tacoma-2-generation.
  4. Hold down the knob for at least 5 seconds. The odometer indicates “000000” and the light goes off.

If the system fails to reset, the light will continue flashing.

All information how can you reset oil service light is taken from Toyota Tacoma second generation owners manual.

 

That it is the full procedure how to reset oil service light Toyota Tacoma second generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Reset odometer and two trip meters Toyota Tacoma 2 generation

Leave a reply

Reset odometer and two trip meters Toyota Tacoma 2 generation. From year: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

How to reset odometer and two trip meters Toyota Tacoma second generation.

Reset-odometer-and-two-trip-meters-Toyota-Tacoma-2-generation.

This meter displays the odometer and two trip meters.

  1. Odometer-Shows the total distance the vehicle has been driven.
  2. Two trip meters-Show two different distances independently driven since the last time each trip meter was set to zero. You can use one trip meter to calculate the fuel economy and the other to measure the distance on each trip. All trip meter data is cancelled if the electrical power source is disconnected.
  3. Trip meter reset knob-Resets the two trip meters to zero, and also change the meter display. To change the meter display, quickly push and release the knob. The meter display changes in the order from the odometer to trip meter A to trip meter B, then back to the odometer each time you push. To reset the trip meter A to zero, display the meter A reading, then push and hold the knob until the meter is set to zero. The same process can be applied for resetting the trip meter B.

All information how to reset odometer and two trip meters is taken from Toyota Tacoma 2 generation owners manual.

That it is the full procedure how to reset odometer and two trip meters Toyota Tacoma 2 generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.