Tag Archives: level

Reset oil service light Fiat Ducato 3

Leave a reply

How to reset oil service light Fiat Ducato III.

Reset oil service light Fiat Ducato 3. From year: 2007, 2008, 2009, 2010, 2001, 2012, 2013, 2014.

Engine oil level gauge.

This gauge shows the engine oil level.

Versions with digital display.

Turning the ignition key to MAR, the display will show the engine oil amount by displaying five symbols.

Reset oil service light Fiat Ducato 3

Partial gradual turning off of the symbols indicates oil decrease.

If the oil level falls below the preset limit (topping up is therefore required), the five dashes will start flashing on the display.

The oil level is correct when 4 or 5 symbols are turned on. If the fifth symbol does not turn on, it shall not be considered as a failure or low oil level in the sump.

IMPORTANT Proper engine oil level shall however be checked by means of the dipstick (see paragraph “Checking levels” in section “Vehicle maintenance”).

Few seconds after, engine oil amount symbols will disappear from the display, and:

  • if scheduled servicing interval is near to come, the display will show the distance to cover and the instrument panel warning light Reset key service Fiat Ducato third generation will turn on. When reaching the scheduled servicing interval the display will show some dashes.
  • then, if engine oil change interval is near to come, the display will show on the top of the screen the distance to cover to next oil change together with message “OIL” displayed on the bottom of the screen. When reaching the scheduled servicing interval the display will show five dashes.

Versions with multifunction display.

Turning the ignition key to MARthe display will show the oil level by the turning on/off of five symbols.

Reset oil service light Fiat Ducato 3

Partial gradual turning off of the symbols indicates oil decrease. The oil level is correct when 4 or 5 symbols are turned on. If the fifth symbol does not turn on, it shall not be considered as a failure or low oil level in the sump. When the oil level falls below the preset limit the display will show the dedicated message to warn the driver that topping up is required. IMPORTANT Proper engine oil level shall however be checked by means of the dipstick (see paragraph “Checking levels” in section “Vehicle maintenance”).

Few seconds after, engine oil amount symbols will disappear from the display, and:

if scheduled servicing interval is near to come, the display will show the distance to cover and symbol Reset key service Fiat Ducato third generation. When reaching the scheduled servicing interval the display will show a dedicated message.
then, if engine oil change interval is near to come, the display will show the distance to cover to next oil change. When reaching the scheduled servicing interval the display will show a dedicated message.
All information are taken from Fiat Ducato 3 owners manual.

Toyota Land Cruiser 200 series reset tire pressure warning light

Leave a reply

How to reset tire pressure warning system Toyota Land Cruiser 200 series.

Reset tire pressure warning light Toyota Land Cruiser 200 series. From year: 2008, 2009, 2010, 2011, 2012, 2013, 2014.

  1. Park the vehicle in safe place and turn the “ENGINE START STOP” switch to OFF mode. While the vehicle is moving, initialization is not performed.
  2. While the vehicle is moving, initialization is not performed. Make sure to adjust the tire pressure to the specified cold tire inflation pressure level. The tire pressure warning system will operate based on this pressure level.
  3. Turn the “ENGINE START STOP” switch to IGNITION ON mode.
  4. Press and hold the tire pressure warning reset switch until the tire pressure warning light blinks slowly three times and the message “TIRE PRESSURE RESET PROCEEDING” appears on the multi-information display.
  5. Wait for a few minutes with the IGNITION ON mode, and then turn the “ENGINE START STOP” switch to OFF mode.
  6. The tire pressure warning valve and transmitter is equipped with a unique ID code. When replacing a tire pressure warning valve and transmitter, it is necessary to register the ID code of tire pressure warning valve and transmitter. Have the ID code registered by your Toyota dealer.

Any tire over 6 years old must be checked by a qualified technician even if they have seldom or never been used or damage is not obvious.

If you press the tire pressure reset switch accidentally.

If initialization is performed, adjust the tire inflation pressure to the specified level and initialize the tire pressure warning system again.

When the initialization of the tire pressure warning system has failed.

Initialization can be completed in a few minutes. However, in the following cases, the settings have not been recorded and the system will not operate properly. If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Toyota dealer.

When operating the tire pressure warning reset switch, the warning light does not flash 3 times and the setting message does not appear on the multi-information display.

Reset tire pressure warning light Toyota Land Cruiser 100 series

Leave a reply

How to reset tire pressure warning light Toyota Land Cruiser 100 series.

Reset tire pressure warning light Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

This light comes on when the ignition key is turned to the “ON” position. If the tire pressure warning system works properly and tire inflation pressure is appropriate, the light goes off after a few seconds. This light comes on or flashes in the folowing cases when the ignition key is turned to the “ON” position.

When the low tire inflation pressure is detected while driving.

If any tire has low inflation pressure, the light comes on.

The light goes off after the tire inflation pressure is adjusted to a specified level.

When initializing the system.

If initialization is completed, the light blinks three times.

When the system malfunctions.

If the system malfunctions, the light blinks. Although it is no problem to continue driving, have your vehicle checked by your Toyota dealer as soon as possible.

All information how to reset tire pressure warning light is taken from Toyota Land Cruiser 100 series owners manual.

Oil reset service light indicator Skoda Superb B6 (3T)

Leave a reply

How to reset service light indicator Skoda Superb B6 (3T).

Reset service light indicator Skoda Superb B6 (3T). From year: 2008, 2009, 2010, 2011, 2012, 2013.

oil-reset-service-light-indicator-Skoda-Superb-B6-3T

 

 

 

 

 

Service Interval Display.
Before the next service interval, a key symbol Skoda-key-serviceSkoda key service and the remaining kilometres are indicated on the display for several seconds after switching on the ignition. At the same time, the remaining days until the next service interval are displayed.

The following is displayed in the information display:
Service in … km or … days.

The kilometre indicator or the days indicator reduces in steps of 100 km or, where applicable, days until the service due date is reached.

As soon as the due date for the service is reached, a flashing key symbol Skoda key service and the text Service appears in the display for several seconds after the ignition has been switched on.

The following is displayed in the information display:
Service now!

Displaying the distance and days until the next service interval.
You can use the button 3 to display the remaining distance and days until the next service interval » see above picture.

A key symbol Skoda key service and the remaining distance appear for several seconds in the display. At the same time, the remaining days until the next service interval are displayed.

On vehicles which are equipped with the information display, you can call up this display in the menu Settings, see the below info.

Resetting Service Interval Display
It is only possible to reset the Service Interval Display, if a service message or at least a pre-warning is shown in the instrument cluster display.

We recommend that this reset is completed by a SKODA specialist garage.

The SKODA specialist garage:

  • Resets the memory of the display after the appropriate inspection.
  • Adds an entry to the Service Schedule.
  • Affixes the sticker with the entry of the following service interval to the side of the dashboard on the driver’s side.
  • Reset the service interval display by using the reset button 7 from above picture.

On vehicles which are equipped with the information display, you can reset the Service Interval Display in the menu Settings see the below info.

oil-reset-service-light-indicator-Skoda-Superb-2 (2)

Operating with the buttons on the windscreen wiper lever.

  • Activate the Main menu by pressing the rocker switch A button from above picture for longer.
  • Individual menu items can be selected by means of the rocker switch A . When the pushbutton B is briefly pressed, the information you have selected is displayed.

Operating with the buttons on the multifunction steering wheel.

  • Activate the Main menu by pressing and holding the button C button from above picture for a short while.
  • By briefly pressing the C button you will reach one level higher.
  • The individual menus can be selected by pressing the adjustment wheel D. The selected menu is displayed after briefly pressing the adjustment wheel D .

You can select the following information:

  • MFD
  • Audio » Operating instructions for the radio
  • Navigation » Operating instructions for the navigation system
  • Phone
  • Aux. Heating
  • Assistants
  • Vehicle status
  • Settings

The menu items Audio and Navigation are only displayed when the factory-fitted radio or navigation system is switched on.
The menu item Aux. heating is only displayed if a factory-fitted auxiliary heating is installed.
The menu item Assistants is only then displayed if the vehicle is fitted with fatigue detection.

Note, if the information display is not activated at that moment, the menu always shifts to one of the higher levels after approx. 10 seconds.

Settings:

You can change certain settings by means of the information display. The current setting is shown on the information display in the respective menu at the top below the line.

You can select the following information:

  • Language
  • Autom. blind
  • MFD data
  • Convenience
  • Lights & Vision
  • Time
  • Winter tyres
  • Units
  • Assistants
  • Alternative speed displayed
  • Service
  • Factory setting
  • Back

Select the menu item Back to return to one level higher in the menu.

Service, here you can have the remaining kilometres and days until the next service interval displayed, and reset the Service Interval Display.

Toyota Land Cruiser 100 series reset low fuel level warning light

Leave a reply

How to reset low fuel level warning light Toyota Land Cruiser 100 series.

Reset low fuel level warning light Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

This light comes on when the fuel level in the tank becomes nearly empty. To reset this light you must fill up the tank as soon as possible and the warning light will go off.

Al infromation are taken from Toyota Land Cruiser 100 series owners manual.

That it is the full procedure how to reset low fuel level warning light Toyota Land Cruiser 100 series. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.