Tag Archives: information button

Reset service light oil life indicator dashboard Buick Enclave

Leave a reply

How do you reset maintenance light, reset service light indicator Buick Enclave, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Buick Enclave, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Press the vehicle information button (i) until OIL LIFE REMAINING displays.
  3. Press and hold the SET/RESET (check mark) button until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
  4. Start the engine and verify CHANGE OIL SOON light goes out (if this does not happen, turn off the engine and repeat steps).

Oil light reset maintenance Buick Lucerne

Leave a reply

Reset service light indicator, engine oil life Buick Lucerne, year 2006, 2007, 2008, 2009, 2010, 2011 reset instructions:

1. Turn the ignition to run (one position before starting engine).
2. Press the vehicle information button (i)until OIL LIFE REMAINING displays.
3. Press and hold the SET/RESET button until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
4. Turn the ignition off and start the engine to verify the indicator has been reset.

Oil light reset maintenance Buick Enclave

Leave a reply

Reset service light indicator, engine oil life Buick Enclave, year 2008-2013 reset instructions:

1. Turn the ignition to run (one position before starting engine).
2. Press the vehicle information button (i) until OIL LIFE REMAINING displays.
3. Press and hold the SET/RESET (check mark) button until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
4. Start the engine and verify CHANGE OIL SOON light goes out (if this does not happen, turn off the engine and repeat steps).

Oil service reset Saturn Sky

Leave a reply

2007-2009

Turn the ignition to run (one position before starting engine).
Press the information and reset buttons on the DIC at the same time to enter the personalization menu.
Press the information button to scroll through the available personalization menu modes until the DIC display shows OIL-LIFE RESET.
Press and hold the reset button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Saturn Outlook

Leave a reply

2007-2009

If your vehicle does not have Driver Information Center (DIC) buttons:
Turn the ignition to run (one position before starting engine).
Press the trip odometer reset stem until OIL LIFE REMAINING displays.
Press and hold the trip odometer reset stem until OIL LIFE REMAINING shows 100%. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
Turn the ignition off and then start the engine to verify the indicator has been reset.

If your vehicle has Driver Information Center (DIC) buttons:
Turn the ignition to run (one position before starting engine).
Press the vehicle information button (square) until OIL LIFE REMAINING displays.
Press and hold the set/reset button (arrow) until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
Turn the ignition off and then start the engine to verify the indicator has been reset.