Tag Archives: ignition switch

Reset key not accepted message Saab 9-3

Leave a reply

How to reset key not accepted message Saab 9-3 first generation.

Reset key not accepted message Saab 9-3 first generation. From year: 1998, 1999, 2000, 2001, 2002.

  1. Enter the key in the ignition and turn it until the lights on the dashboard go on, one position befor you start the engine.
  2. The key not accepted message light cannot be removed by pressing CLEAR button.
  3. To reset this warning light push the brake pedal to clear.

If the your Saab 9-3 does not start. If the text “KEY NOT ACCEPTED” appears on the SID when the engine refuses to start, the trouble may be a fault in the transponder of the key or in the receiver of the ignition switch. Proceed as follows:

  1. Turn the key back to the LOCK position.
  2. Turn the key to the ON position.
  3. Press one of the buttons on the remote control (the LED on top of the dash stops flashing).
  4. Start the engine.

Reset ABS warning light Toyota Avalon third generation

Leave a reply

How to reset ABS warning light Toyota Avalon 3 generation.

Reset ABS warning light Toyota Avalon third generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

Vehicles without vehicle stability control system.

The light comes on with the ignition switch is set at ON. If the anti−lock brake system works properly, the light turns off after a few seconds. Thereafter, if the system malfunctions, the light comes on again. When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system does not operate, but the brake system still operates conventionally. When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system does not operate so that the wheels could lock up during a sudden braking or braking on slippery road surfaces.

If either of the following conditions occurs, this indicates a malfunction somewhere in the components monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle.

The light does not come on when the ignition switch is set at ON or remains on.
The light comes on while you are driving.
A warning light turning on briefly during operation does not indicate a problem.

If the “ABS” warning light remains on together with the brake system warning light, immediately stop your vehicle at a safe place and contact your Toyota dealer.

In this case, not only the anti−lock brake system will fail but also the vehicle will become extremely unstable during braking.

Vehicles with vehicle stability control system.
The light comes on when the ignition switch is set at ON. If the anti−lock brake system and the brake assist system work properly, the light turns off after a few seconds. Thereafter, if the system malfunctions, the light comes on again. When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system and the brake assist system do not operate, but the brake system still operates conventionally. When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system does not operate so that the wheels could lock up during a sudden braking or braking on slippery road surfaces.

If either of the following conditions occurs, this indicates a malfunction somewhere in the components monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle.

The light does not come on when the ignition switch is set at ON or remains on.
The light comes on while you are driving.
A warning light turning on briefly during operation does not indicate a problem.

If the “ABS” warning light remains on together with the brake system warning light, immediately stop your vehicle at a safe place and contact your Toyota dealer. In this case, not only the anti−lock brake system will fail but also the vehicle will become extremely unstable during braking.

All information how can you reset ABS warning light is taken from Toyota Avalon third generation owners manual.

Reset charging system warning light Toyota Avalon 3 generation

Leave a reply

How to reset charging system warning light Toyota Avalon third generation.

Reset charging system warning light Toyota Avalon 3 generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

This warning light comes on when the ignition switch is set at ON, and goes off when the engine is started. When there are problems in the charging system while the engine is running, the warning light comes on.

When the charging system warning light comes on while the engine is running, malfunctions such as the engine drive belt being broken may have occurred. If the warning light comes on, immediately stop the vehicle in a safe place and contact your Toyota dealer.

All information how can you reset charging system warning light is taken from Toyota Avalon 3 generation owners manual.

That it is the full procedure how to reset charging system warning light Toyota Avalon 3 generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

Reset charging system warning light Toyota Tundra 2 generation

Leave a reply

How to reset charging system warning light Toyota Tundra second generation.

Reset charging system warning light Toyota Tundra 2 generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

This warning light comes on when the ignition switch is turned to the “ON” position, and goes off when the engine is started. When there are problems in the charging system while the engine is running, the warning light comes on.

When the charging system warning light comes on while the engine is running, malfunctions such as the engine drive belt being broken may have occurred. If the warning light comes on, immediately stop the vehicle in a safe place and contact your Toyota dealer.

All information how to reset charging system warning light is taken from Toyota Tundra 2 generation owners manual.

That it is the full procedure how to reset charging system warning light Toyota Tundra 2 generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

Service oil reset Toyota Venza 2011 – 2013

Leave a reply

How do you reset service light indicator Toyota Venza Year 2011, 2012, 2013

1. Start the engine and bring up the trip meter A reading.
Vehicles with smart key system:
2. Turn the “ENGINE START STOP” switch off.
3. While pressing the Trip Meter reset button, press the “ENGINE START STOP” switch once (do not start engine).
4. Continue to press and hold the button until the trip meter displays “000000”.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Vehicles without smart key system:
2. Turn the ignition switch off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates “000000” and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.