Tag Archives: ignition switch

Oil reset service light indicator Volkswagen VW Golf 7

Leave a reply

How do you reset maintenance light, reset service light indicator VW Golf 7, year , 2013, 2014, 2015. For reset maintenance light and that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life VW Golf 7, year 2013, 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Acess the settings menu:
     a) Use the windshield wiper lever toggle switch or
     b) Use the buttons on the right hand side of the multi function steering wheel
  3. Select the “Settings” menu followed by the “Service” submenu. Select “Reset” and confirm.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

or

  1. With the ignition switch off press and hold the 0,0 button.
  2. Turn the igntion on (do not start the engine) and the service interval display is now in reset mode.
  3. Release the 0,0 button.
  4. Within 20 seconds press the min button and wait for the display to switch back to the normal display.
  5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset change oil light indicator service Fiat 500

Leave a reply

How do you reset maintenance light, reset service light indicator Fiat 500, from year: 2014, 2015. For reset maintenance light and that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life Fiat 500, oil reset instructions:

How to reset change oil indicator system Fiat 500.

  1. Turn the ignition to run (one position before starting engine).
  2. Fully depress the accelerator pedal slowly three times within 10 seconds.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil reset service light Mitsubishi Lancer Sportback

Leave a reply

How to reset oil service light Mitsubishi Lancer Sportback (CX_A).

Reset oil service light Mitsubishi Lancer Sportback. From years: 2008, 2009, 2010.

  1. The “- – -” display can be reset while the ignition switch is “OFF”. When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from “OFF” to “ON”.
  2. Lightly press the multi-information meter switch until the information screen switches to service reminder display screen.
  3. Press and hold the multi-information meter switch for about 2 seconds or more to display the (wrench icon) and make it flash.
  4. Lightly press the multi-information meter switch while the icon is flashing to change the display from “- – -” to “CLEAR”. After this, the time until the next periodic inspection will be displayed.
  5. Start the engine to verify the indicator has been reset.

Oil reset service light Mitsubishi Lancer Evolution X

Leave a reply

How to reset oil service light Mitsubishi Lancer Evolution X.

Reset oil service light Mitsubishi Lancer Evolution X. From years: 2008, 2009, 2010.

  1. The “- – -” display can be reset while the ignition switch is “OFF”. When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from “OFF” to “ON”.
  2. Lightly press the multi-information meter switch until the information screen switches to service reminder display screen.
  3. Press and hold the multi-information meter switch for about 2 seconds or more to display the (wrench icon) and make it flash.
  4. Lightly press the multi-information meter switch while the icon is flashing to change the display from “- – – ” to “CLEAR”. After this, the time until the next periodic inspection will be displayed.
  5. Start the engine to verify the indicator has been reset.

Oil reset service light Mitsubishi Lancer Evolution 10

Leave a reply

How to reset oil service light Mitsubishi Lancer Evolution 10.

Reset oil service light Mitsubishi Lancer Evolution 10. From years: 2008, 2009, 2010.

  1. The “- – – -” display can be reset while the ignition switch is “OFF”. When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from “OFF” to “ON”.
  2. Lightly press the multi-information meter switch until the information screen switches to service reminder display screen.
  3. Press and hold the multi-information meter switch for about 2 seconds or more to display the (wrench icon) and make it flash.
  4. Lightly press the multi-information meter switch while the icon is flashing to change the display from “- – – – ” to “CLEAR”. After this, the time until the next periodic inspection will be displayed.
  5. Start the engine to verify the indicator has been reset.