Tag Archives: How to reset

Reset oil service light Fiat Ducato 3

Leave a reply

How to reset oil service light Fiat Ducato III.

Reset oil service light Fiat Ducato 3. From year: 2007, 2008, 2009, 2010, 2001, 2012, 2013, 2014.

Engine oil level gauge.

This gauge shows the engine oil level.

Versions with digital display.

Turning the ignition key to MAR, the display will show the engine oil amount by displaying five symbols.

Reset oil service light Fiat Ducato 3

Partial gradual turning off of the symbols indicates oil decrease.

If the oil level falls below the preset limit (topping up is therefore required), the five dashes will start flashing on the display.

The oil level is correct when 4 or 5 symbols are turned on. If the fifth symbol does not turn on, it shall not be considered as a failure or low oil level in the sump.

IMPORTANT Proper engine oil level shall however be checked by means of the dipstick (see paragraph “Checking levels” in section “Vehicle maintenance”).

Few seconds after, engine oil amount symbols will disappear from the display, and:

  • if scheduled servicing interval is near to come, the display will show the distance to cover and the instrument panel warning light Reset key service Fiat Ducato third generation will turn on. When reaching the scheduled servicing interval the display will show some dashes.
  • then, if engine oil change interval is near to come, the display will show on the top of the screen the distance to cover to next oil change together with message “OIL” displayed on the bottom of the screen. When reaching the scheduled servicing interval the display will show five dashes.

Versions with multifunction display.

Turning the ignition key to MARthe display will show the oil level by the turning on/off of five symbols.

Reset oil service light Fiat Ducato 3

Partial gradual turning off of the symbols indicates oil decrease. The oil level is correct when 4 or 5 symbols are turned on. If the fifth symbol does not turn on, it shall not be considered as a failure or low oil level in the sump. When the oil level falls below the preset limit the display will show the dedicated message to warn the driver that topping up is required. IMPORTANT Proper engine oil level shall however be checked by means of the dipstick (see paragraph “Checking levels” in section “Vehicle maintenance”).

Few seconds after, engine oil amount symbols will disappear from the display, and:

if scheduled servicing interval is near to come, the display will show the distance to cover and symbol Reset key service Fiat Ducato third generation. When reaching the scheduled servicing interval the display will show a dedicated message.
then, if engine oil change interval is near to come, the display will show the distance to cover to next oil change. When reaching the scheduled servicing interval the display will show a dedicated message.
All information are taken from Fiat Ducato 3 owners manual.

Reset oil service light indicator Fiat Ducato 3

Leave a reply

How do you reset maintenance light, reset service light indicator Fiat Ducato 3. For reset maintenance light and that can be made manually by use button on car dash board. From year : 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

How to reset warning service light on a Fiat Ducato III.

Scheduled servicing ( service ) Fiat Ducato third generation.

Through this function it is possible to display information connected to proper vehicle servicing.

Proceed as follows:

  • Briefly press button MODE: service in km or mi, according to previous setting, will be displayed see paragraph “Units”.
  • Briefly press button MODE to go back to the menu screen or press the button for long to go back to the standard screen.

The “Service schedule” plans different service intervals according to engine models; service interval is displayed automatically, with the ignition key at MAR, starting from 2,000 km (or 1,240 mi) from this deadline and it is shown again every 200 km (or 124 mi). Oil change warning messages are displayed in the same way. Use buttons ▲ and ▼ to display alternately service schedule info and engine oil change info. Below 200 km servicing indications are displayed more frequently. Service indications will be displayed in km or mi according to previous unit setting. When a programmed maintenance interval (coupon) is near to come, turning the ignition key to MAR, the display will show the message “ Service ” followed by the number of km/mi to go before vehicle servicing. Contact a Fiat Dealership to carry out any service operation provided by the “Service schedule” and to reset the display.

Fiat Ducato 3 reset trip computer

Leave a reply

How to reset trip computer on a Fiat Ducato III.

Reset trip computer Fiat Ducato 3. From year : 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

The “trip computer” displays information (with ignition key at MAR), relating to the operating status of the vehicle. This function comprises two separate and independent trips: “Trip A” and “Trip B” concerning the “complete mission” of the vehicle (journey).

Both functions are resettable, reset – start of new mission.

“Trip A” shall be used to display the figures relating to:

External temperature.
Range.
Trip distance.
Average consumption.
Instant consumption.
Average speed.
Travel time (driving time).
“Trip B”, available on multifunction display only, shall be used to display the figures relating to:

Trip distance B.
Average consumption B.
Average speed B.
Travel time B (driving time).
“Trip B” function can be excluded (see paragraph “Trip B On/Off”). “Range” and “Instant consumption” cannot be reset.

Values displayed Fiat Ducato 3 third generation.

External temperature.

It indicates the external temperature of the driver compartment.

Range.

This value shows the distance in km (or mi) that the vehicle can still cover before needing fuel, assuming that driving conditions are kept unvaried. The display will show “—-” in the following cases:

value lower than 50 km (or 30 mi).
vehicle left parked with engine running for long.
Trip distance Fiat Ducato 3. This value shows the distance covered from the start of the new mission.

Average consumption Fiat Ducato 3. This value shows the average consumption from the start of the new mission.

Instant consumption Fiat Ducato 3. This value shows instant fuel consumption (this value is updated second by second). If parking the vehicle with engine on, the display will show “—-”.

Average speed Fiat Ducato III. This value shows the vehicle average speed as a function of the overall time elapsed since the start of the new mission.

Travel time Fiat Ducato III. This value shows the time elapsed since the start of the new mission.

IMPORTANT Lacking information, Trip computer values are displayed with “—-”. When normal operating condition is reset, calculation of different units will restart regularly. Values displayed before the failure will not be reset.

Button TRIP, set on the top of the right steering column stalk, shall be used (with ignition key at MAR) to display and to reset the previously described values to start a new mission:

short push to display the different vaues.
long push to reset and then start a new mission.
New mission Fiat Ducato 3.

Reset can be:

“manual” resetting by the user, by pressing the relevant button;
“automatic” resetting, when the “Trip distance” reaches 3999,9 km or 9999,9 km or when the “Travel time” reaches 99.59 (99 hours and 59 minutes);
after disconnecting/reconnecting the battery.
IMPORTANT The reset operation in the presence of the screens concerning the “Trip A” makes it possible to reset only the information associated with this function.

IMPORTANT The reset operation in the presence of the screens concerning the “Trip B” makes it possible to reset only the information associated with this function.

Start of journey procedure. With ignition key at MAR, press and keep button TRIP pressed for over 2 seconds to reset.

Exit Trip – to quit the Trip function: keep button MODE pressed for over 2 seconds.

Reset the auto up feature Fiat 500

Leave a reply

How to reset the auto up feature Fiat 500.

Reset the auto up feature Fiat 500. From year : 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

Should the Auto Up feature stop working, the window probably needs to be reset. To reset Auto Up:

  • Pull the window switch up to close the window completely and continue to hold the switch up for an additional two seconds after the window is closed.
  • Push the window switch down firmly to the second detent to open the window completely and continue to hold the switch down for an additional two seconds after the window is fully open.

Wind buffeting Fiat 500.

Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions. This is a normal occurrence and can be minimized. If the buffeting occurs with the sunroof open, adjust the sunroof opening to minimize the buffeting or open any window.

Reset service spanner light Fiat Ducato

Leave a reply

How to reset service wrench light on a Fiat Ducato second edition.

Reset service spanner light Fiat Ducato. From year : 2002, 2003, 2004, 2005, 2006, 2007.

  • Turn ignition to on without starting the engine.
  • Press and hold the button situated in right side of the dashboard.
  • The button must be held down for about 10 seconds until the display shows a spanner and CFG 1.
  • Release the button and then press it again and hold down for about 5 seconds until the CFG1 and wrench key will disappear.
  • Done, you managed to resetservice spanner light Fiat Ducato 2.