Category Archives: Service light reset Nissan

Oil reset, oil light indicator, maintenance light reset, service light reset, without using a computer for Nissan

Service oil reset Nissan Maxima

Leave a reply

2006-2008
Turn the ignition to run (one position before starting engine).
When you turn the ignition key run, the system start-up warning is displayed on the screen. Read the the warning and select the OK key by pressing the ENTER button.
When the TRIP button is pressed, the following modes will display on the screen: Warning message (if any) TRIP1 > TRIP 2 > FUEL ECONOMY > MAINTENANCE > AUDIO OR OFF > TRIP 1
Select MAINTENANCE and then select the Engine Oil key using the joystick and press the ENTER button to display the screen to change the maintenance interval/RESET.
To return to the previous display after the MAINTENANCE NOTICE screen is displayed, press the BACK button.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2009-2010
Turn the ignition to run (push START/STOP button once).
Press the (square) button, located on the instrument panel just behind the steering wheel to the left, to display the SETTINGS mode.
In the setting mode screen press (circle) button to move to MAINTENANCE.
Set a desired interval by pushing (circle) button to highlight ENGINE OIL and pressing (square) button. The reset mode will open up and allow you to enter the desired distance.
Select RESET and select new time or distance.
Repeat step 3 for ENGINE OIL FILTER. Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Nissan GT-R

Leave a reply

2009-2010
Push the ignition switch to the ON position (do not start the engine). Use the ENTER switch and toggle the vehicle information display to show the SETTING screen. Use the NEXT switch to select
Use the NEXT switch to select MAINTENANCE, then confirm with ENTER switch to change to the oil maintenance menu (follow the insructions).
i) SETTING > MAINTENANCE > OIL > ENGINE OIL to set or reset the mileage for the engine oil change.
ii) SETTING > MAINTENANCE > FILTER > to set or reset the mileage for the engine oil filter.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Nissan Cube

Leave a reply

2009-2010
Turn the ignition to run (one position before starting engine). The maintenance information (the wrench symbol and distance to change a maintenance item) comes on for about 5 seconds and then turns off.
Push the trip computer mode switch A for 3 seconds while the wrench symbol and maintenance information are displayed. The symbol and distance display will start flashing and the display shows the current interval (ie. 5000KM).
Push the switch A to increase the interval distance. Each step increases the interval by 1000km. The interval distance can be set up to 30000km after the display returns to 0.
If no further action is made, the display returns to the previous mode and the new interval is set. If the interval distance is set to 0, the display will skip the maintenance information when the ignition is placed in run or start mode.

Service oil reset Nissan Armada

Leave a reply

2008-2009
Turn the ignition to run (one position before starting engine).
Press the vehicle information display INFO button located on the isntrument panel to toggel to “Setting”.
In the “Setting” mode screen rotate the INFO button to move to “Maintenance” and press INFO to select the menu.
Set a desired interval by rotating the INFO button to highlight ENGINE OIL and then press the INFO button to select.
Select RESET and select new time or distance.
Repeat step 3 for ENGINE OIL FILTER. Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Nissan Altima 2007-2015

Leave a reply

How do you reset maintenance light, reset service light indicator Nissan Altima, year 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015. For reset maintenance light and that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life Nissan Altima 2007-2012, oil reset instructions:

  1. Turn the ignition to run (one position before starting engine/push START/STOP button once).
  2. Press the (square) button, located on the instrument panel just behind the steering wheel to the left, to display the SETTINGS mode.
  3. In the setting mode screen press (circle) button to move to MAINTENANCE.
  4. Set a desired interval by pushing (circle) button to highlight ENGINE OIL and pressing (square) button. The reset mode will open up and allow you to enter the desired distance.
  5. Select RESET and select new time or distance.
  6. Repeat step 3 for ENGINE OIL FILTER. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light indicator, engine oil life Nissan Altima 2014, 2015, oil reset instructions:

  1. Turn the ignition to run (one position before starting engine/push START/STOP button once).
  2. Press the square button (□) , located on the instrument panel just behind the steering wheel to the left, to display the SETTINGS mode.
  3. Use the up/down arrow buttons to highlight SETTINGS and confirm with the ENTER button.
  4. From the SETTINGS menu select MAINTENANCE and confirm with the ENTER button.
  5. Select the maintenance item to be reset; reset distance and confirm with the ENTER button.
  6. Repeat for any other MAINTENANCE items.
  7. Turn the ignition off and then start the engine to verify the indicator has been reset.